CBI Moab 2.0 front bumper question?

Hi everyone,

I’m looking into purchasing the CBI Moab 2.0 front bumper for my 2011 Toyota Tacoma.

My question to you all that own a CBI 2.0 Bumper, are there pre existing holes on the bumper to install a LED light bar? Whats the maximum length light bar that can be installed between the center hoop?

If anyone out there that has close-up pictures of there CBI Moab 2.0 bumper with a LED light bar installed on the bumper and can share, would be greatly appreciated

I included a picture just to give you an idea of what I’m talking about

 

Mine came with pre-drilled 1/2" holes on 12" centers to which I mounted a 28" light bar with adjustable bottom-mount feet. I swapped to a Hard Korr 22" with end mounts and had to drill new holes for it . Can't comment on what will fit inside the hoop.

Here you can see the stock hole positions under the new light bar. And yes, I used to have a winch. I moved the license plate to hide my shame after removing it.


Older picture with the 28":

 

Where are you buying from? I would just send them an email. I think the older ones don't

 

30” cheapo off of Amazon. Bumper is pre drilled. Fit like a glove

 

Hold up. My bad. Had to go back n double check.
28” cheapo NOT 30”

 

Hey PFD Fire, could you help me out? I’m trying to install m Moab 2.0 and like most other people can’t find install instructions. Can you tell me where the mounting brackets attach to the frame (or post a pic)? I’m usually good at figuring this stuff out but nothing looks right. Thanks!!!

 

Hey buddy wish I can help you. I ended up ordering a Demello front bumper which I’ll be picking up next week. I’m sure someone here can help you out

 

Snapped a couple just now. The bottom sandwiches between your swaybar and the frame (if you have a swaybar). Mine is long gone.

 

That’s what I was afraid of. I snapped a coupler trying to unbolt the sway bar. Were the 2 bolts at the bottom of the bumper (where the stock tow loop is) nearly welded to the frame on yours? I was hammering on the ratchet just to turn them. Thanks a ton for the pics!

 

they drilled mine due to no holes

 

You snapped swaybar bolts?
I don't recall having any issues like that at all. Best of luck.

 

Those two bolts were a pain in the ass to remove on my truck. I used a 1/4" ratchet with a big ass pipe

Edit: whoops 1/2" ratchet not 1/4".

 

I ended up cutting the lower part of that thing off for my camburg UCA spacers

 

I snapped the coupler on my ratchet. Think I’m gonna have to get a breaker bar. Couldn’t get the bolts loose.