Coilover spring rates

Im looking at 2.0 or 2.5 coilovers from either fox or radflo. RST is calling for a Radflo 2.5 with a 250 top, 300 lower.. sounds really stiff for tue weight. Any suggestions?

 

Not to sound contrite...but yah I’d suggest you keep planning against your driving needs and existing mods.

 

Tacoma front coilovers typically only use a single rate spring. With little additional weight a 13x600lb spring or 14x600lb spring is ideal.
https://accutuneoffroad.com/articles/coilover-spring-rates-for-toyota-tacoma-4runner/

 

Sorry guys, talking with a solid axle swap coil over

 

We can still help with that
We can get you set up with coilovers, help run spring rates for you (with awesome spring swapping program to make sure its perfect) and custom valve them. Not sure which kit you are looking at getting, but this Tech Article may help you get things measured correctly. Let us know!

 

Thanks for the coil information, very helpful

 

Wishing I was in HammerTown to catch a smoking deal on some 14" 2.5 Fox!