What Have You Done To Your 2nd Gen Tacoma Today?

That looks great. How long did it take and when are you doing the backs? That is the next thing on my list of things to do just haven't had time and or the patience to knock it out.

Be Safe..

Dan

 

Looks like you both live in Portland.... maybe an exchange of beer for labor is in order?

 

hahaha, Nawww I will get around to it one of these days. Maybe he can just show up for moral support hahah.

Dan

Also I will not need tabs left. I have the intake removed from my fender area.

 

Finally getting my bed setup where I want it after making a shovel mount today before heading on a trip to Yosemite on Friday.

 

I appreciate it! There were some scuffs and stuff on the passenger side where he hit me but it was all pretty minor. These trucks are really built to last. I guess my passenger side managed to do all that damage to his car lol.

 

I have 3-4 hours total time invested in the fronts at this point, probably. I still need to rework wheel-well liners also. I have plastic temporarily shielding the intake, but installing a more permanent solution is next on the list. I have a big roll of 1/8” thick rubber on the way.

I’ll do the rear at some point in the near future, though 35’s will fit fine back there so it’s not as high of a priority.

 

How much did you trim? That actually looks really good with a 33” tire. I’ve been going back and forth on doing this. I don’t need the clearance, but really like how it looks.

 

Didn’t use it on my Coverkings either

 

I need to do this to my plastic hood scoop insert on my Sport. It's at the beginning stages of clearcoat failure.

 

@TrailYeti I was going to mention this in the other thread. An alternative for your air intake

 

Agreed completely. I follow jeeps everywhere On my 35’s in 4low with stock gears & NAPA HD cv axles and it does fine, hoping to have 4:88’s by end of year or next year

 

Preparing to cut my fenders this weekend and possibly my bumpers as you can see the angle might still change i might just do it straight pause my process i over heat my dremel its better to use a jig saw dremel is weak to do this job

 

I played around with HPTuners for a couple hours trying to get my speedo right.
Got it good enough to drive 40 min to a buddies, Its like being surrounded by half brothers!

 

Ohhhh shit, going to go 35s now that you have the power to push it?

 

what did you use to cover the cuts on the flares? its so clean bro

 

Info on this please?

 

Looks like a Volant, minus the filter box and sticker.

https://www.youtube.com/watch?v=mN73VKyU4xU

https://volant.com/collections/mode...6-closed-box-w-ram-air-scoop-air-intake-38140

 

Volant Ram Air Scoop and
4"-3.5" 90deg reducing elbow
3.5" carbon fiber tube (6" long)
3.5" flex coupling
Volant Intake scoop

Be Safe...

Dan

 

It says it’s only good for 05-11. Any problems with the install on your truck being a 15?

 

Not at all. fits like a glove.

Be Safe...

Dan