What Have You Done To Your 3rd Gen Today?

Cold as H out there today, and furnace in my garage not working, so all I got done today was to upgrade my navigation map.
Now running OE071. Tomorrow or the next day I plan to install my V1 radar detector and Mobius ActionCam

 

Welcome to TW Jim!

 

Thank you. Happy to be here.

 

Thanks for the info. I need to let mine dry out - still had some water on the deck from the ride home in the rain yesterday. Then I'll have a better assessment. Seems to seal pretty tightly, though.

 

I'll get there.

 

Yes they are - found them on Amazon. Fit well - one or two are just a tad large but you can trim if you need. They come with both At and MT options. $15.75 delivered with Amazon Prime.

$22 JDMCAR Compatible with Toyota Tacoma Accessories 2016-2023 Premium Cup Holder, Console, and Door Pocket Inserts Kit (Double Cab, Red Trim)

https://www.amazon.com/gp/product/B07NRWR1JB/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1

 

No problem Mark. We're all here to share a common passion and help one another out when possible. Have a great day and congratulations.

 

Not sure if it is relatable to what you're doing and I don't want to be a fear monger, but I picked up a set of these for my truck and really loved them. Then I ran into a problem with the QI Wireless Charger. I can't say that it was because of the mat I put over it, but the Rubber of the OEM charger has bubbled up and now my phone (or anything else I stick there) won't sit flat. I can't say it was because the new rubber cover held the heat in or if I left the charger on and should have turned the button off or if it was completely unrelated, but thought I'd let you know what happened to me I've got a '16 MT DCSB OR and the Qi Charger pad was nice and flat until sometime after I tossed in one of these aftermarket mats.

I still haven't found a solution to the bubbling, but I'm hoping to when I add a switch for the 2WD Lo mod here soon. I'm hoping I can just stretch the rubber back out once I take things apart for the new switch and have a little better access I may just try to rip out the OEM Rubber and leave the aftermarket.

 

My local dealer had the 17s for cheap! 265/70/17 ko2. 1.25 spider trax. 6112 and 5160s be here Monday.. had them set to 3/4 notch just to bring the front up 1in “according to there notch chart”

 

Congrats on the new truck Mark. It's beautiful!
Just as an FYI..I have that same Lomax tri-fold and have driven thru many long and heavy periods of rain and it has never leaked at all that I could detect.

 

Thanks! I think I'll pull that one off rather than take a chance! I appreciate your taking the time to warn me!

 

Cool!! Great news!! Thanks! The Lomax seems like a great value.

 

SSO slimline with stage two kit.

 

Replaced a broken front grille. Wife hit a owl on her way home and it knocked out the Toyota. While I was at it installed a Warn EVO 10s and 4xinnovations mini slimline front bumper. It all worked pretty well. I really like this bumper. It’s beefy. The shackle recover points are solid! I also like the recessed hawse for winching. I also really liked how the cuts on the plastic are not as crucial as other systems. The way they designed it you have a large margin of error before it shows

 

Drew Brees for Governor!

 

Washed and gave it a good polish with The Last Coat product.

 

I got the same ones but don’t use the Qi charger mat because the charge signal doesn’t go through anyways. Mostly got them for ease of cleaning out all the cup holders.

 

Looks great! Love to see more pics out in the light when you get the chance. Not anything real near term, but that ones on the bumper short list.

 

Finally got around to swapping the aftermarket grille that my truck came with for the TRD Pro style grille.

Tomorrow I’ll be installing the RetraxONE MX.

 

Did you have to lower the rail system to install the cover? Can you post pics of how it attaches to the rail? I have the cargo divider that won't work if the rail is lowered .