1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Xenon Depot HID Kit Install Help

Discussion in 'Lighting' started by AZ_J, Feb 7, 2020.

  1. Feb 7, 2020 at 2:09 PM
    #1
    AZ_J

    AZ_J [OP] Well-Known Member

    Joined:
    Jun 22, 2019
    Member:
    #297126
    Messages:
    198
    Gender:
    Male
    Ahwatukee, AZ
    Vehicle:
    2019 TRD OR 4x4 DCSB
    265/75r16, sliders, softopper, roof rack, 6112/5160's
    Hello,

    I just want to say I appreciate the help before hand. But before I go plugging wires into this truck because I didn't receive an installation guide. I have some questions about the where to plug stuff into.

    I want to start with my question with the bulb wiring itself.

    The (2) wires with red lines above them are the “Not Used” wires for internally wired systems? The (2) wires that are circled green are then connected to the (2) wires coming out of the ballast also circled green?
    IMG_0973.jpg

    Next, the other wire coming out of the ballast, circled blue, plugs into the female plug coming from the negative lead from the relay harness?

    IMG_0974.jpg

    The next wire I have a question about is coming out of the relay harness with a plug, circled purple. I want to confirm that this is the plug that should be connected to the oem plug that we took out of the existing halogen light?

    The other wire I do not have any questions, that is the positive lead with a fuse.

    Let me know if I am correct, but please tell me if my assumptions are incorrect.

    IMG_0975.jpg
     

Products Discussed in

To Top