What Have You Done To Your 3rd Gen Today?

Exactly what I was thinking, I'll bring a cooler for the times I need it. Not worth the loss of bed space.

 

Wired up my junkyard rearview mirror. Sr owners have ignition 12v and ground on the plug in the a pillar. Really that's all you need. Tie the constant to the acc 12v.

 

All I’m saying there’s wiggle room in interpreting most laws.

 

Thanks! Easy install. The build continues....

 

looks nice!
what mats did you have before? Wondering if it’s an update to the OEM all weather mats

 

I can tell you that I already see two areas that need attention... the front corners. The DB is awesome, it’s the bed rails and plastics that need attention. No rain anticipated the next few days, so I’ll look at shoring things up.

I went with the SE. Didn’t need the HD carrying capacity. I plan on a rack on top of the DB eventually. Still working out the plans for the build out. What’s next...bumper n winch, sliders, suspension...

this place is expensive!!!

 

Looking good. No more scratches!!

 

How is your Valentine mounted?

 

I had the stock Tacoma mats that came with the truck that were softer. These are the laser fit weather tech mats, higher up under the pedals and sides than the OEM mats and they overlap the door sill a bit. exact fit to the foot well including the lock tab holes on the drivers side.

 

Took my brother in law and I around 2 hours. Measuring multiple times, cutting, fitting, remeasuring, etc. Not a bad install at all, plenty of videos out there.

 

15 dollar eBay mount. This is a nicer version of what I bought

 

Nice setup. Question, having the water port on the driver side when full plus gear in the two small boxes create more of a "taco lean" ? Since gas tank is also on the driver side. Just curious.

 

@Round the world @Satchmo said...

I fail to see "wiggle room" in interpreting that ^^^^.

@LSUfan1975 I agree. Don't be hating on the LEO for doing their job. If you don't like a law, either work to change it, or just ignore it like Satchmo did. You then need to be willing to accept the penalty if caught.

 

You won't think they are "brilliant" the first time you trip over one and spill your beer.

 

Cupeez...I see my response is rather late.

I finally caught up in this thread this morning. The other day took mine in for the 20k service. They had this in the service area, didn't look like it was for sale

 

I own and swear by my V1, but even I read that question having nothing to do with radar detectors.

 

Choose the logos you want and take them to a local business that does engraving. I found a small shop close by that didn't require a minimum piece order and had them back the next day.

 

Had to laugh.
Must not be Irish!

 

Had the muffler shop weld on a Flowmaster Super 10. Obnoxious as hell when you get on it. Surprisingly mild at idle and cruise.
https://youtu.be/SWTNPmlTjCA