2nd gens on 37" tires

C'mon man!
No DB lifts allowed in this thread

 

To his defense, he said he doesn't have one. Just spacers and blocks.

 

One of my buddies have 36x13.5 bias ply Iroks and they are the same diameter as my 37x12.5 Irok ND radials.

 

It seems like the bias is always a little taller.

 

Nothing but blocks and spacers and JBA HC UCA's. I had to cut the front fenders in front of and behind the front tires. Most of the mid cab body mount has been cut off. I also hacked out the forward most front crossmember and built a new one.
edit: I also cut and beat the pinch weld and beat the shit out of the back of the front fenderwell.

Lol. WRONG.

Thank you.

BFG 37's are 36.5". Well 3 of mine are 36.5", the other one is probably around 36" lmao.

 

Well I'm in the wrong thread It just looks so tall and the stock flares assumed there was a DB behind the skid. Would be cool to see some pictures!

 

There's a video of it somewhere on here. I don't think anyone clicked it because the link looks sketchy AF.

 

Have to button up a few things but getting close.

 

Wide...

 

Very lol

 

Why yes I do weld in crocs haha

 

Beast mode engaged...

 

Went for a quick test drive and all went good! There is a little dead spot in the steering but about 30 it goes away. Also drove up on the log in 4lo with the front locker on adjusting the steering with zero effort during the climb. If I did that with the oem rack I could never turn, just had to hold the wheel straight and unlock the diff at the end of the climb.

 

Your front suspension looks a bit stiff

 

The rear is very soft. Going to revalve the rear and front soon.

 

Swapped the tsls for some 37 12.50 16 maxxis trepadors.

 

I’m glad this thread is still rad.