What Have You Done To Your 2nd Gen Tacoma Today?

Looks like you will be soldering closed the ACC SKT Relay, Pin 3 and Pin 5. Thanks for the info @EatSleepTacos

 

Trail edition wheels
Baja mtz p3 285/70r17

 

Finally started sound deadening in cabin.

Installing Media Panel in the center console. Connections - HDMI Media input, USB Media input, AUX input, USB 5volt, 2.4Amp output

Installing another media panel in the back of the center console. Connections - HDMI Output, 3.5 Headphone Jack, USB 5volt, 2.4Amp output, USB Media Input.

Cocoon GRID-IT! Accessory Organizer & Vehicle OCD - Center Console Organizer

Does anyone know what this is?

$20 Axxess AX-FDUSBAUX USB/AUX/HDMI Knockout Replacement Panel for Select Ford Vehicles

2 of Axxess AX-FDUSBAUX USB/AUX/HDMI Knockout Replacement Panel for Select Ford Vehicles

$15 Cocoon CPG5GY GRID-IT!® Accessory Organizer - Small 10.25" x 5.125" (High-Rise Gray)

Cocoon CPG5GY GRID-IT! Accessory Organizer - Small 10.25" x 5.125" (High-Rise Gray)

$18 Vehicle OCD - Center Console Organizer for Toyota Tacoma (2005-2015) - Made in USA

Vehicle OCD - Center Console Organizer for Toyota Tacoma (2005-2015) - Made in USA

 

@Xx Ares xX That is the AC inverter

 

50 degrees today so washed it up. A lot of salt still on the roads and parking lots.

 

Swapping in new bed bolts. Old ones were pretty rusty. Had to take a couple out, 1/4 turn at a time. Took almost 15 minutes for just one bolt lol. Blew out the holes w/ compressed air before reinstalling new ones w/ plenty of anti-seize and some marine grease up top.


They all looked like this.....

 

Installed Font Runner tracks in my Leer. I almost went with Rhino Rack for the self install but these were just a couple bucks more and looked beefy. I’m glad I did these things are solid. Would def recommend to anyone. I got quoted $300 for Thule tracks installed by the local Leer dealer, these were about $120, and install was a breeze and having seen Thule and Rhino rack tracks I feel these are superior strength Tracks. Front Runner sells heavy duty track nuts and bolts in a 12 pack also but you have to ask for them as there are currently listed on their site.

 

Put on some Victory 4x4 molle panels on my center console. Super happy with these, and impressed with the build quality and material. @monkeyevil

 

What wires are you tapping into for the media panels?

 

What head unit are you running the HDMI input to again?

 

Went for a little 100km drive during a snowstorm in Montréal. It took 5h to do back n forth. Highways were single lane going about 50km/h.

 

I went with the 9” DMH-C5500nex because of the flush clean install look it has. I didn’t go with a dvd receiver cuz disks are out dated and this will play movies/tv shows with a usb. It also has youtube built in.
https://www.google.com/search?q=dmh-c5500nex&prmd=vin&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjSjIDirvrnAhWJwAIHHXj8CLcQ_AUoAnoECA8QAg&biw=375&bih=630&dpr=3#imgrc=pCK7rkPOcPgtuM

What it looks like in a second gen.

 

is that relay rated for continuous duty?

 

Is any relay? Since that would defeat the purpose of needing one in the first place. I don’t foresee it being an issue. It has power pumping through it for hours on end on long drives, plus it’s not like there’s a constant draw on it.

 

I was reading up on this HU and it says it does not support Bluetooth. Is that accurate? I would hate to give up some current functionality.

 

:]

 

In regards to both center console & Rear (USB 5volt, 2.4Amp output) , I'll be tapping the connection after K4 Pin so it will power off when vehicle is turned off. Using the following:

$11 POWISER SAE 1 to 4 Extension Cable Quick Disconnect Connector, 1 SAE Polarity Reverse Adaptors, for Automotive, Solar Panel SAE Plug

LIXIN 14AWG SAE DC Power Automotive Connector and

$13 Motorcycle USB Charger, Mroinge 4.8A SAE to USB Adapter with Voltmeter & Ammeter, Quick Disconnect Plug with Dual USB Charger Perfect for Smart Device Charging, with ON/Off Switch & Waterproof Cover

Mroinge 5V 4.8A Motorcycle USB Charger SAE to USB Adapter

Kenwood Excelon DDX9906XR 6.8" High Def. Display DVD Multimedia Receiver Wireless CarPlay/A.Auto

Kenwood Excelon DDX9906XR
This head unit has the capability of HDMI INPUT/OUTPUT. You just have to convert to/from Composite Video and HDMI. I am going to use the following to achieve this goal

HDMI => Composite: Input

Kenwood CA-C3AV AV Cable for Video AV Input

Kenwood CA-C3AV AV Cable for Video AV Input &

$15 GANA HDMI to RCA, HDMI to AV, 1080P HDMI to 3RCA CVBS AV Composite Video Audio Converter Adapter Supports PAL/NTSC with USB Charge Cable for PC Laptop HDTV DVD-Black (Additional Cable)

GANA HDMI to RCA &

$18 Battery Tender Quick Disconnect USB Charger Adapter - Charge Mobile Devices with 12V Vehicle Battery on The Go - 081-0158

Battery Tender USB Charger Adaptor: (Power GANA)
or

$49 iSimple ISHD01 MediaLinx HDMI To Composite Video/Audio Adapter Cable (Black)

iSimple ISHD01 MediaLinx HDMI To Composite Video/Audio Adapter Cable

Composite => HDMI: Output: This will allow me to play a DVD for the kids in the back and listen w/ headphones and I can still listen to my music up front. I might install a headrest monitor at a later date.

$7 StarTech.com 6in Stereo Audio Y-Cable - 3.5mm Male to 2x RCA Female - Headphone Jack to RCA – Computer / MP3 to Stereo 1x Mini-Jack 2x RCA (MUMFRCA), Black

6in Stereo Audio Y-Cable

GANA RCA to HDMI, 1080P Mini RCA Composite CVBS AV to HDMI Video Audio Converter Adapter Supporting PAL/NTSC with USB Charge Cable for PC Laptop Xbox PS4 PS3 TV STB VHS VCR Camera DVD (Black)

RCA to HDMI, GANA
Battery Tender USB Charger Adaptor: (Power GANA)

 

Did new rotors and pads today. Sprayed some fluid film around to keep it ripe. New Calipers soon for sure more rusty than thought shoulda blasted them with some paint. Recent photo of the unit.

 

It has Bluetooth just not wireless CarPlay or android auto. Personally I went with this one for the buttonless look

Edit: also it’s an 8” screen I said 9” previously.

 

Gee, I don't think anyone here would have any ideas on what to mod next. Wait, what........?

You were lucky to get any of them out. I had to have my mechanic use electric induction to get one of them out! Two of the heads were stripped by the time we were done. ( I say we, the mechanic got half of them, I got the others.) I bought a used set from a member on here. Not going to pay around $20 per bolt from the dealer!