What Have You Done To Your 3rd Gen Today?

Don’t forget the 13.

 

Unfortunately my locking gas caps, tried 3, wouldn't work with the gashole so I traded it for a Tacoma coin. I'm pretty sure that I came up with a solution but not until it was gone.
That said I still needed a solution, so now I just put it on my tonneau and leave the key it it. Can't forget your gascap if you can't drive away!

 

It took mine about 2 weeks

 

"I'm mostly done with it" ROFL !!! No, no your not, and the longer your on here the more money your gonna spend. We should have an AA group for this place. Oh and welcome to TW.

 

Ordered a hood mount from Victory 4x4 to finally mount an NMO antenna for my ham radio.

https://www.victory4x4.com/product/VT3CB-BARE.html

 

Here's my post on the antenna mount I am using for the Victory bracket (antenna not yet installed): https://www.tacomaworld.com/threads/clean-vhf-cb-radio-installs.415584/page-68#post-21658659

 

I'm going with the same thick mount NMO with an SMA connector for my HT. Decided to go with the

$30 Tram 1181 TRAM 140MHz-170MHz + 430MHz-470MHz Dual Band NMO Antenna (1181)

Tram 1181 1/4 wave. 1/2 wave was too tall at 38". We'll see how the ground plane works with it.

 

That's a parenting fail right there. He left the 10mm deep socket right below the standard.

 

I completed the ultimate mod today!
I paid the remaining $2K on my Taco and paid it off!



Hey bank:

 

Can't say I've ever lost any of my tools... But then again I'm OCD. Lots of 10mm to choose from here..

 

I'm saving this pic.

 

Ordered mine one day, was shipped the next day.

 

Had my emblem kit, glove box organizer, console topper, and interior/ license plates lights come in a day early! Everything was easy except license plate lights and the map lights. I had to pull the whole console out to change the bulbs because my big a** fingers couldn’t grab the bulb but it came out easy and snapped back in easy. The license plate lights took me about 25 minutes and 69 cuss words to get my hands into the little space to get them out and in. If you can remove the whole assemble, I’d definitely recommend that Route
Getting 35% tint in the front probably first thing in the am tomorrow or Friday and that’ll be it for mods till I get a tonneau cover

 

Where did you get the LED lights for interior?

 

I'm really happy with mine. It makes a 1/4 wave length 2 meter antenna almost invisible.

 

Dat pistol though...

 

Congratulations! Feels good don't it?

 

Those plate lights are fun aren't they?
Welcome to the "I'm bleeding and those suckers are staying in there forever club!"

 

Oh yes it does!!

Thanks!