What Have You Done To Your 3rd Gen Today?

They do look great on your Tacoma.

 

I think brown is classy. I may be biased though. Katzkins look awesome and comfy!

 

Did the same thing prying in the wrong direction after removing the A pillar cover. 100 cdn for a new speaker grill cover. Red clips are all good and transferable. Very snug fit even with the broken clip tab.

 

are the 20 degree sliders more leveled or are they angled up towards the cab?

 

For $27.18 for both on Amazon this has to be 2 of the best things ive done to the truck

JDMCAR center console tray & glove box organizer insert

 

Ran it through a touchless car wash and hit the "record" button:

 

Yep.

You have the same idea that I do. I'm only going to cut all that plastic and replace my rear bumper after I have scraped the hell out of it.

Yeap.

 

I'd like to see what you do. I haven't found a solution to mount them to the bed with out the mounts ripping out. Especially when they are full.

Yeah. I might road my truck a little hard.

 

This truck is beautiful. Period.
Zim

 

Is that under the armrest??

 

For 2.5 gallons of gas and water (each side of the bed), I'm using this can mount: https://wavianusa.com/collections/accessories/products/steel-fuel-can-holder

Bolting each one to the bed rail with the Rago bracket: I should be done by tomorrow

I'll also be doing a water pump mod to the water can here (2.5 gal to stay below the bedside), pump mod here: https://www.margygreen.com/Blog-Adventure/Sceptre-Water-Can

 

Still look great. Made 1 adjustment the 2nd day. Have not touched them in 4 years.

 

I pulled mine out today, blue sea replacement should be here tomorrow, can you tell me which wire from the lighter is the positive?

 

Put my Carhart seat savers on.

 

A front end refresh!
Dissent offroad aluminum bumper, factor55 flat link, comeup seal gen2 winch and the new rigid industries 4” sae fog lights!

 

If you look inside the lighter there is a small square cut out in the bottom that you can see and one above it that you cannot see, stick a pick in there and press pretty hard to release the clips holding the lighter in, it doesn’t just pop right out you have to really work it.

 

But those jerrycans hold 5 gallons, not 2.5 gallons. That's roughly 35lbs of fuel for a full can, plus the weight of the can.

Are you only filling them half way or doing something else? Why waste the space if you are not filling them up all the way. Am I missing something?

 

Im thinking to use 2 bolts on the tracks and the big bed bolt.

 

Sorry, I should have made it more clear. They make both the cans and holder in 2.5 and 5 gallons. I'm using the 2.5 gallons to keep them below the bedside. For the 5 gallon cans, you'd probably use the 5 gallon holder and possibly 2 per can.

2.5 gallon picture here

5 gallon picture here

I'll share photos of my install tomorrow

Edit: install pics here