Need help wiring 1gen HIDs

Hi TW,
Hope everyone is staying Corona free. I’m getting into some Sierra Nevada.

I made these headlights from a new set of TYC capa certified lamps.



This is how I have it all plugged together right now.

I feel like I have all the parts I’m supposed to have, but I’m having trouble getting the lights to actually work.

I haven’t even begun trying to mess with the halos yet, so please feel free to shed some uh... light... on where I could/should wire that in as well.

I have simply pulled the h4 plugs out of the lights in my truck and set the new lights in the bay to try and get them to light up before bothering to take out the old lights and actually install.

Maybe someone can tell me for certain what wires of my black/red/white plugs on my new lights go to the
passenger side: RW/RG/RY
and driver side: RBlue/RG/RY.

THANK YOU FOR ANY HELP!

Johnny


It’s a lot of chrome, I know. I figure once I prove I have function I can worry about paint.

 

This is all for a 2002 Tacoma.
The parts I bought are:

iJDMTOY 3.0in H1 Bi-Xenon HID projectors

iJDMTOY Easy Relay Harness compatible with H4 9003 Hi/Lo Bi Xenon head light xenon bulbs wiring controllers

Xentec 9005 5000K HID bulb pair w/ 35W digital slim ballast

Profile 80mm Pivot (Switchback) Halos

 

You might (will) have an issue with the wire input to the HID controller. The vehicle H4 plug has one Positive and 2 negatives. (it's inverted to the "usual" connections.)

 

Oh man, if this shows an obvious solution to anyone, I would love to be walked through it.

 

Caribe, do you think the relays in this image are something that I’m missing?

 

Yes...and the correct H4 connectors to mate with the HID harness

 

Damn. Any link to what I need to buy would be much appreciated.