What have you done to your Tacoma today? 1st Gen Edition

Buy me the DVD

 

Download it via P2P for free

 

That law proved effective to find who makes the lower ball joints for toyota

 

This is the write-up I originally found and followed. My lights were garbage before, replaced the harness (super easy), installed the higher power bulbs, gave the lenses some 1200 2200 3000 grit love and polish and dear god, I can see. But like I said, you do you. I was going to do projectors until I realized this cost less and didn't require as much fiddling. YMMV.

https://www.tacomaworld.com/threads/the-ultimate-headlight-upgrade-h4-not-led-or-hid.398066/

 

I finally did the satoshi mod because my cheapo lightbar wouldn't fit with the stock grill in the location I preferred. BTW, said cheapo lightbar is damn bright. Did I do it today? No. In fact, it took me so freaking long to do this it was barely worth it, but I took the time to do it "right" and what was an annoying chrome front grill is now this. Added a little flair to represent the upper left corner.

I did f-up and destroyed the little triangle inserts most people use which resulted in having to spend a crap ton of time bending the triangle mesh to lie flush with the grill, and then epoxy, and then lots of holding in place carefully by hand for a long time.

I think it looks alright.

 

Not as good as Knock, Knock.

 

Have not seen that yet but heard there be tatas

 

What to the grocery store in my Mall Crawler today.

Food shortages? Ya, ain'no'bahdi'got'time'fo'dat





Came home and cleaned up the garage (in the wake of the wedding prep)... cleared it out enough for me and my Mall Crawler friends to have a Mod Day on Saturday.




As long as the Wu Tang Flu doesn't cause the apocolypse before the weekend.

 

Water and ice tea, nice

 

No worries bro... I got all the bases covered.

 

Were they running short on beer, and that's why you had to resort to buying that Bud Light crap?

 

Lol... My wife is the BudLight drinker. I'm stocked

(see above)

 

I'm stuck at my dad's house in Orinda. Before his operation and stroke he went to Costco about 3 times a week and never remembered what he had bought before, booze-wise, so I have numerous bottles of brandy, Jack, Makers Mark, rum and Bulleit on hand...we'll be fine

 

I think I’m loosing my steering rack. I’m noticing significant resistance when I turn left of center. Anyone had this symptom as the rack is going out or should I look at a different component?

 

Fishing now poses a risk of "spread of the coronavirus"

 

video better

 

Glad those lines worked out for you. Looks great!

 

I had a similar issue I dont rember if it was right or left but ended up having the intermediate stering shaft replaced. The joint on the end was binding.