What Have You Done To Your 2nd Gen Tacoma Today?

I'm wayyyyyy too lazy for all that. I don't even like going to the store when the wife asks me to. And its literally down the block. (Which I still drive to)

 

Stock headunit?

$41 Add An Amp Amplifier Adapter Interface to Factory OEM Car Stereo Radio System for select Toyota Scion Subaru Vehicles- Add Subwoofer Bass Amp etc.- No Factory Premium Amp- Vehicles listed below

https://www.amazon.com/gp/aw/d/B00CQUL240?psc=1&ref=ppx_pop_mob_b_asin_title

Use one of those. No cutting or splicing. Plug and play T harness.

 

Yes stock 2015 head unit

 

Here's a video on how to check the gap in your spark plugs. As for coloring and mileage they look fine.
https://youtu.be/IuW3svdqKZM

 

Installed my 4 horn setup from @BartMaster1234. Sounds great!

 

Haha is that a firetruck in front of you?

Let me know if I can outfit the whole fleet!

 

Will do! Had some downtime at work.

 

Let's see the firetruck parked in front of it!

 

Started friday evening and finished today.
Fox 2.5 DSC Ext Travel with Eibach 14in 650lb springs
Fox 2.5 DSC Ext Travel (Made for Tundras and modifications are needed)
JBA HC UCA
Icon RXT leaf pack on option 2
Wheelers front superbumps
Timbren rear bump stops

NOTES:
Fox 2.5 rears ext travel are made for Tundras. The shock hose fitting needs to be rotated 180 degrees after loosening the lock nut to correct the orientation. Same for the reservoir. The hose fitting needs to be rotated about 15-20 degrees to mount flush against the frame. The bottom shock mount bearing/bushing needs to be grind down a few mm to fit the Tacoma shock mount. The Fox logo on the reservoir will be upside down...peel, removed and new Fox stickers are on the way.

Fox 2.5 front ext travel reservoir hose fitting needed to rotate ever so slightly by loosening the lock nut and rotated about 25 degrees or so as the hose is way too stiff to mount as it out of the box. Fox supplied brackets interfered with SOS Concepts bumper bracket so a bit of trimming to the said bracket is needed. Still very solid and helps greatly with clearance. I will keep an eye on out it.

It rides amazing and i haven't dial in the settings yet. Overall very happy with the upgrade and new wheels will be on soon. Came from 5100s/884 and 3 leaf AAL. Didn’t take pics of rears as i was focusing getting it done before sunset. Will take some pics tomorrow.

 

That’s a good video. Just make sure you don’t use the same technique with iridium plugs.

 

Just a wash. With this quarantine situation figured I’d shine the truck up

 

Congrats!

 

One more

 

Working on the D2S retrofit.

 

COVID-19 makes me want to do more stuff but my part time Lyft driving is basically gone for now.

 

Replaced my OEM JBL speakers that were blown with ones with no issues. Thank god.

Also dipped my badges.

 

I was just looking at these for my truck as well. they look good!

Also: *Logos* - "RB" logo is now a more durable, attractive, and permanent stamped logo. This is nice.

 

What bumper is that?

 

Relentless Fabrication Stingray low-pro

 

I’d you can wait a few days, I’d go T harness over cutting/splicing.

I have that LOC running off my stock HU and it works great.