Questions to do a small lift

Looking for some advice and if anyone may have done this already.

2019 DCLB SR V6 AT 4X4. Daily driver, will be adding N-Fab Podium step bars in the near future.

I am hoping to get Bilstein 5100s all around and only lift the front about an inch to level the truck. Would it be worthwhile to invest in aftermarket coils (OME) or go with the factory coils and go up one notch from the bottom.

Looking to maintain a smooth ride and some off road capability for light trails.

I have settled on getting Yokohama Geolandar M/T G003 tires. I will be going to the local shop tomorrow and check if they can bring in the 255/85/16s. If not, they do stock the 265/75/16s.

Any help or opinions welcome.

 

You'll probably need the TRD OR wheels to run the 255s even after the 1" lift.

 

I have the factory alloy 16X7 Y spoke wheels, from what I have researched they are the same size and offset as the TRD OR wheels and tire fitment is the same.

 

Gents, another question, if I just kept my current front struts, could I use OME 884 springs to get and additional inch of lift?