What Have You Done To Your 3rd Gen Today?

Removed and painted...much better than chrome

And some lights from @mattgecko

 

These are Renogy panels. The way I've mounted them, it's a permanent installation, but you could certainly fab something up where you could remove them. They do make those flexible thin ones too if those are more up your alley.

Panels: https://www.renogy.com/100-watt-12-volt-monocrystalline-solar-panel-compact-design/

 

Went to the garage. Got in the driver seat, turned it on and imagined driving it. #fckcovid19

 

Finally had the exhaust re-routed so we could install the BAMF t-case skid. Also had an access panel cut into our front skid so we have easier access to the oil filter.

 

You running -50 offset on those wheels or 2.5" spacers?

 

LOL where do you live that you can’t drive?

 

I think the joke is that there's not a lot to do at the moment.

 

does rerouting the exhaust like that throw any codes? I assume it voids warranty right?

 

Do you have a link to the install of the No drill strut install or pics of your own? I have a project box mounted above my fuse box and need to know if there will be enough clearance for the strut install.

 

Live vicariously


Traffic sure is nice since covid though

 

That's awesome, nicely done! Two questions for you:
1. Does that mod / skid set replace the stock cross member or am I miss-remembering where that is?

2. Does the new exhaust routing change the sound of the exhaust? I'd really like to do this for the clearance, but really not a fan of every aftermarket exhaust I hear on Tacos and prefer the truck stays relatively quiet.

 

Ain't that the truth! Plenty of parking too!

 

Whoah, you mean you don't know?

Toyota warranties are voided when you customize the front seat with the impression of your individual butt.

 

The finish on that emblem is nice, what paint did you use?

 

I started mine today! BOOM

 

krylon satin black the all in one

 

I saw a YouTube video just a couple days ago. I'll try to find it again.

 

great info thanks! would you say a cmc is necessary for that size? I don’t mind molding or trimming plastic but I’m trying to avoid a cmc

edit: I’m not going to be running as much of an offset that you are. Maybe I could get away with no cmc then. I’m thinking 1.25” spacers on my sport wheels

 

@oostroma

Here's a link to a TW post . . .

https://www.tacomaworld.com/threads...-3rd-gen-today.399305/page-7735#post-23093728

Here's a YouTube video . . .

https://www.youtube.com/watch?v=f17h6GZXHaY

But it's not the one I was remembering. I can't find it now.

 

Careful, we got a bad ass over here, breaking quarantine.