What have you done to your Tacoma today? 1st Gen Edition

Oh my I need those in my life

 

This is only to defeat the O2 sensor Heater circuit. Not the actual O2 circuit itself. I have a stand-alone PLX DM6 Wideband simulating a Narrowband signal after powering my AFR Gauge.

 

Oh, I removed my CAT a few years ago, I get a code once in a while.

 

One of those URD O2 simulators would stop the code from reappearing

 

Well just finished installing my new caliper bleeder screw , biggest pain in the ass when you don’t have the right removal tools , i gave up went to my techs shop, he welded a nut and removed it in 5 minutes , thank you guys for the help finding the correct screw

 

Did mine today. A must for almost a 20 year truck. Im a fan

Going to work on sprucing up the badging next. Heat gun and string/ect best for removal?

 

New tails in

 

insane bro, I can only image what the topside looks like.

 

same here.

 

about to tackle my LBJ replacement, read plenty of threads and got the part numbers for them. I thought i read something that people should just replace the tie rods as one of those "do it while you're doing this" can anyone confirm this? just wanna buy everything at once and ship it all at once.

 

I do my outer tie rods since you have to pop em to change the lbj, not much more work to remove them.

Inners would be up to you since the “while I’m in there” can quickly snowball after that (lca bushings, cams, steering rack bushings, etc)

If you do outer tie rods, make sure you count the threads showing and mark it so you can get your alignment close. I marked mine but was still off a bunch since they were so worn out and poorly aligned to begin with. You’ll definitely want to get an alignment after you change them

 

I wanted to wear my old ones out a little more, but snow is predicted for tonight, so...

 

do you have the part number for the outer tie rod? since this is my first maintenance thing i've done on a rig before im sure those 2 will keep me busy enough and don't want to bite off more than i can chew

 

RH

$70 45046-39295 Tie Rod End Sub-Assembly

45046-39295
LH 45047-39175

Always ordered these for my 03 prerunner and 02 4wd. Check toyotapartsdeal.com and plug in your VIN to verify.

 

Partsouq.com is also a good website to verify parts with using your VIN

 

2nd this. I've used it for both the Taco and the 4Runner. Even better than using the official toyota parts site.

 

There's so much talk about part numbers for the lower ball joints that it made my head spin trying to look it up on TW, went onto partsouq.com and plugged in my vin and it brings up the parts diagrams for your specific vehicle and you know exactly which part numbers to order

 

That's exceptional. What's the secret for the window trim?

 

thanks for that, i just wanted to cross-reference what i was getting on toyotapartsdeal.com to someone or somewhere else just to be sure

edit: do i need to order cotter pins and castle nuts and bolts or will those come with it?

 

If I remember right, my outer tie rods came with new cotter pins and castle nuts (OEM parts). Someone else may have to confirm