Tacoma - OVTUNE - VFTUNER - Update Info and Original Development

Well I really hope not... I'm still a dongle user and would like to keep it that way. Don't have to worry about switching computers if ever needed. @OVTune can you confirm this?

 

Same here, I flashed the 91 2.0 for 31-33 tires with no gears (have 265/75/R16), reset LV’s and At. Started fine for about 15-20 seconds but then idle went crazy rough. Let it idle for 5 min and then took it around the block. Was running and shifting odd so I came home and flashed back to 91 19800 2.0 beta and truck is idling fine now. Truck was cold and temp in the low 50’s when I flashed it.

Waiting for others to post to see if I was alone in my experience.

 

I reset the values and on the new tune yeah it was bad. Back on the old tune and it’s running fine. I’ll hold off for a bit...see if others have issues.

 

Sorry, it's only been confirmed about a million times on this thread.

 

hmm it really shouldnt be *that rough* of an idle. let me double check everything

 

I flashed that same 91octane 33tires tune and had issues.

 

Same tune I loaded.

 

No worries, if this was easy we’d have dozens of tuning vendors to choose from, so clearly this is no easy task. Take your time and let us know when you have something.

 

Flashed and My truck idles and drives great right off the bat. 2.0 87 only 20 miles or so tho so far

 

Well maybe i have missed it. And usually check in at least 2-3 times a week.

 

It's for sure, 100%, you will need to change over if you want 2.0 final. The bright side is you get the new tuning software for free.

 

I was tempted to load the 91 standard tune but decided I’d watch the thread and hold off in case Mat finds issues on all the tunes. Good to know the 87 Standard seems good.

 

Instead of just clicking, try right click - Save As and save it where you’ll remember. Then open in flashing software.

 

if my ecu was updated from 04B03 to 04B04 will the ID still be the same for tune licensing purposes?

 

still waiting for reg key for p5f. Order 14643, sent dongle a week ago. Hopefully all of older dongle guys can try 2.0 soon. Im sure Mat is pulling his hair out trying to get this all set.

 

will have links back in a moment. 91 files should have clean idle on them.

 

Can you share what’s changing between files in layman’s terms?

I loaded the 91 octane 31-33 inch tire file and had the rough idle. Drove it around the block and things didn’t get better.

 

For us that traded in our dongles, we just need to register the p5f right? We don't need to download and reinstall the flash manager correct?

 

A carry over setting on OLE. fixed



04B04 2.0 Final For Test / Review.

Features:
-Revised Torque table control
- Shift map patch
- GearLock Patch S Mode
- Revised VVT
- Revised Shift points
- Revised Throttle control.
- Revised Octane learning / Ignition logic
- Quick shift for 3-4 fixed
- "tip in" - Moderate increase - global
- Cold start PI / DI





Gearlock is enabled by putting the truck into S Mode.
When in S Mode, it will NOT downshift unless you push the shift selector AND let off the gas pedal when you do.


and a whole lot more.
This is for testing and review. Please let us know your thoughts, so we can make any last minute changes that may be needed, or get everyone updated and on 2.0F.
4.88 and 5.29 gear folks should no longer be speed limited.
NOTE, tire / gear revision does not change speedo.

any issues please let me know. Unless you have an immediate issue.Please do NOT post ANY feedback unless you have a minimum of 100 miles driven.
Please use Clear AT and Clear LV
Any feedback needs to be directed towards me.



Base 2.0 for a stock truck on 87 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+87+OL.p5f
Base 2.0 for a stock Truck on 91 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+91+OL.p5f

Base 2.0 for a stock truck with tires 31~33 inch on 87 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+87+OL+31-33+T.p5f
Base 2.0 for a stock truck with tires 31~33 inch on 91 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+91+OL+31+-+33T.p5f


Base 2.0 for a truck with 4.88 gears and 31~33 inch tires on 87 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+87+OL+31-33+4.88+.p5f
Base 2.0 for a truck with 4.88 gears and 31~33 inch tires on 91 octane
https://ovtune.s3.us-east-2.amazona...l+Test/04B04+2.0+Base+91+OL+31+-+33T+4.88.p5f

Base 2.0 for a truck with 4.88 gears and 34~36 inch tires on 87 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+87+OL+34-36+4.88.p5f
Base 2.0 for a truck with 4.88 gears and 34~36 inch tires on 91 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+91+OL+34-36+4.88.p5f

Base 2.0 for a truck with 5.29 gears and 31~33 inch tires on 87 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+87+OL+31-33+5.29+.p5f
Base 2.0 for a truck with 5.29 gears and 31~33 inch tires on 91 octane
https://ovtune.s3.us-east-2.amazona...l+Test/04B04+2.0+Base+91+OL+31+-+33T+5.29.p5f

Base 2.0 for a truck with 5.29 gears and 34~36 inch tires on 87 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+87+OL+34-36+5.29.p5f
Base 2.0 for a truck with 5.29 gears and 34~36 inch tires on 91 octane
https://ovtune.s3.us-east-2.amazonaws.com/04B04+2.0+Final+Test/04B04+2.0+Base+91+OL+34-36+5.29.p5f

 

@OVTune Do you think any reg keys from the dongle exchange will go out today along w the 04B04 review/test launch?