Dometic+Fridge Slider+Diamondback Cover

So I am in the process of purchasing a Dometic 75 with the slide and I am wondering if anyone had this setup with there diamondback cover?

wanting to make sure it all fits underneath and cover will close.

I have done the measurements for the Dometic (18.58in) and clearance is there which is (19.10in) I just don’t know when adding the slide to the equation if I will run into an issue.

not exactly positive how much added height the slide raises the fridge. Any in-site or photos would be great.

Thanks.

 

@Papadave418 Has a post here with pics. Exactly what you're looking for. This thread in general is a good resource.

https://www.tacomaworld.com/threads/diamondback-covers-modifications.553966/page-9#post-19723837

 

yeah I did see this yesterday as well, but this post he did a DIY slide where as I was going with the dometic or Tembo tusk slide so I figure the difference in height may cause an issue.

 

Based on the below, I'd bet it adds about 1 inch to the height. I'd be worried that it wouldn't fit.

 

Yeah looking like it may be about .5 too y’all. That’s a bummer. Only other option would Possibly adding a thicker stiffer weather stripping to my diamondback which could help raise it a bit to provide the proper clearance.