Rusty | 2015 Tacoma 4x4 DCSB 6speed | TOTAL CHAOS, Baja Designs, GFC, Custom Front Bumper, More!

Rusty | 2015 Tacoma 4x4 DCSB 6speed | TOTAL CHAOS, Baja Designs, GFC, Custom Front Bumper, More!



Vehicle Specifications:
2015 Tacoma DCSB 4WD 6-Speed Manual

Front Suspension:
- TOTAL CHAOS UCA's
- TOTAL CHAOS Expedition Series LCA’s
- ELKA 2.5” Remote Reservoir Coilovers w/ DC Adjuster Knobs
- TOTAL CHAOS Body Mount Chop Plates, Spindle Gussets, Cam Tab Gussets

Rear Suspension/Axle:
- Deaver Stage 3 Expedition Leaf Springs
- ELKA 2.5” Remote Reservoir Shocks w/ DC Adjuster Knobs
- TOTAL CHAOS Bolt-on Rear Bumpstop Mounting Kit
- KING 2.0" Bumpstops

Interior:
- Rear Seat Delete
- Dobinsons Fridge
- Pro Eagle Floor Jack w/ Mount

Body/Exterior:
- TOTAL CHAOS Custom Front Bumper/Lightbar/Skidplates
- Front Runner Drawer System w/ Water Tank and Pump
- Solar Panels/Dual Odyssey Batteries/Mean Green Alternator
- Go Fast Camper
- Baja Designs 20” Onyx 6 w/ TOTAL CHAOS Custom Actuator System
- Relentless Fabrication High Clearance Rear Bumper w/ Tire Swingout
- Relentless Fabrication Rock Sliders
- Baja Designs Squadron Fog Lights and S2 Rear Backup/Dust Lights
- Maxtrax MKII Recovery Boards
- ARB Compressor On-Board Air
- Frontrunner Awning
- RAD Rubber Engine Splash Guards
- TOTAL CHAOS Custom Fenderliners and Front Mudflaps
- TOTAL CHAOS Bed Stiffeners

Wheels/Tires:
- TRD Offroad 16" Wheels
- BFGoodrich Mud-Terrain KM3 315/75R16

Check out the project build page on our site!

TOTAL CHAOS
WWW.CHAOSFAB.COM

 

Handsome truck. Just keep it away from the beef-o-reeno!

 

A few pics...








Pics from the build process coming soon

 

Any issues with 35s on the stock TRD wheels? So much beef!

 

No issues

 

Nicee!

 

What’s the extended length on your rear Elka’s?
Awesome rig!!

 

Don't have that info right in front of me. We're currently closed for a shop vacation but I'll get the details when we re-open

 

Here are some suspension shots!

 

The TC items are complemented well by the fit an finish of the Elkas. Quality products all!

 

More rusty pics!

 

Close-up of the drawers that are sitting in the back of Rusty

On the driver side we added an air fitting.
There is a water tank with 12v pump up front! Switch and hose attachments are on the passenger side

 

@TOTAL CHAOS so, this truck is bad ass. I am assuming you have done all the work here and I am considering a very similar set up for the suspension on my own truck currently. Do the Stage III Deaver Expedition springs add lift to the rear I assume? If so how much? Also, I would imagine this utilizes the Elka 2-3" kit versus the 0-2" version correct? At the end of the day I would like a 2" lift all around (well, 2" in the front w/ the rear level w/ that.) I was trying to determine which option (0-2" maxed out or the 2-3" kit on the low setting) was a better option since they cost the same.

 

It's hard to say how much lift is added with the expedition springs since due to the extra weight of the swing out
I wish we had more measurements before adding the extra items to the back. Email info@chaosfab.com, we might have some more info from customers and other builds

 

awesome build all around. looks like nothing but fun on 4 wheels.

I got a few questions about that front runner drawer system if you got a couple seconds since I think I might have reached the end of the internet googling the subject.

Are those the Large universal Pickup Drawers?
https://www.frontrunneroutfitters.c...230mm-long-for-double-cab-bakkie-pick-up.html

Any issues mounting them or any fitment issues in the short bed?

How do they clear the bed stiffeners?

And how do you like them in terms of quality and security?

 

Sorry about the big delay!

Shoot us an email if you can: info@chaosfab.com

Our team is slightly short staffed right now but we're happy to answer any questions we can and provide some additional pics

 

Meet Rusty!

New walk around video of our 2nd Gen overland build 'Rusty' is up. So many practical upgrades on this one including TC UCA's, Expedition Series LCA's, 35's and more. Check it out and let us know what you think

https://youtu.be/rpe--Wenohs

 

Check out the video above for some additional details. No issues with the bed stiffeners whatsoever.

We should still have the part #'s saved for the exact drawer we used