After market wheel and tires w/out upgrading suspension

i was looking to put after market wheel and tires on my 2016 trd off road however i didnt want to make any suspension changes yet since i dont do any off roading minus the occasional dirt road to get to a boat ramp.

I was wondering what size wheel and tire I can go with and not get any rub?


I am new to aftermarket wheel and tires so any help would be appreciated.

 

Your OR came with 16” wheels. Do you want to go bigger? What are you looking for?

 

ideally would like to go bigger but would be fine with 16’s

 

You said you’re looking for aftermarket. Is there a design you’ve seen that caught your attention. Also there is a wheel and tire forum you may want to go check out

 

I think you can get away with 275 tires and doing a CMC for peace of mind.

 

https://www.tacomaworld.com/threads/largest-tacoma-tire-sizes-on-stock-suspension.67550/
what a wonder the search bar has to offer

 

Sorry. Brand new to the forum. Thanks for dropping the link

 

State what you’re looking for.
Do you want a taller tire? Wider tire?
Biggest wheel possible with rubber band tires?
Most offset wheels?

 

np, check this one out too
https://www.tacomaworld.com/threads/tire-size-tool.12697/

 

Great. Thanks

 

Wider preferably. Guessing that means more offset?

 

17"s have much better sizes and tire selection.

Check out others rigs on here and see what they are running for ideas.

 

Here is my stock suspension 2020 OR. Wheels are 17x8.5 w/ 0 offset. Tires are 265/70/17 (which is generally considered the biggest you can go on stock suspension without doing some cutting). Hope that helps!

 

Helps a ton thanks! No issues with rubbing?

 

17 x 8
0 Offset

265/70/17 BFG KO2s

No rubbing

Just make sure and remove mud flaps

 

Awesome thanks

 

No rubbing if you remove the mud flaps (or dont have any in the first place). I had to do very minor trimming to eliminate very minor rubbing in the front after installing mud flaps.