1st Gen Lunchtable Thread - General Discussion

it drove well with it the way i had it. i run the tundra similarly but its closer to 3 degrees of caster.

 

Even cross caster and camber?

 

i try to get it as close to 0 as possible on camber and caster even on each side

the factory specs work well for camber and toe. its just adding caster you need

 

With about 2in of lift I usually shoot for close to 0 camber 0 toe and 3 degrees caster. The higher caster helps clear the 33s so if you have smaller tires you don't really need that much

 

2.7 was the sweet spot for me (might of been 2.8) but i had 32s. so 3 is likely ideal for 33s

 

Tires are stock right now. Going to 265/75r16 soon.

 

2.7-2.8 caster should be enough. thats what i ran without issue on the FJ wheels with 265/75r16

 

i had Uniball uppers. no idea of the SPC will make it any different for you because of where the adjustment is made.

 

Pulled the old beast out of it's hole today. Put it in pops warehouse. A project for this fall. I have tons of brand new parts for it. Also it has tons under it.

 

depending on if i have room this summer the tacos coming home to get the 4runner engine and trans in it for now. may make it drivable as i build the new bones... ive fixed the old frame to a point where i feel like i can drive it... the steering rack mount isnt fubar anymore. and the LCA mount cracks are addressed..

 

I’m actually going to get the 02 sorted out then bring the 01 home. Reseal the 4runner engine and set it up with the 01 fuel injectors and shit so I can have a running driving truck with the Camry cam shafts... test bed. I’ll even throw the headers back on the ol girl.



tundra “should” be mostly back together next week. I’ll barrow my buddies trailer to bring the 01 home after I get the 02 axle seals and catalytic on. And it’s much needed bath

 

Looking at the 4runner block... I do. Believe he super charger will bolt on without rust issues

 

That's the best body style GM ever made... Though I'm partial to the dual headlight of GMC front end. Still, that's a kickass Chevrolet man

 

https://youtu.be/Y1-gHqov5w8

 

So this was the original airplane tugger, huh? Long before Tundra, or any fuller size pickup, was even a thought in a Toyoda engineer's head

 

Morning

 

Somehow I think Dan Blocker introduced the new body style for the nation to see in the fall of 1971 on Bonanza.

 

Hmm, anyone getting rid of their 01-04 front bumper brackets, and the top valance reinforcements for the chrome top?

 

Hit the rev limiter in the shit box last night for the first time. Was in 3rd, got to about 95 mph lolol

 

Lulz