TACO GARAGE - Any camera - anytime, plug and play, steering wheel controlled. 2020!

He posted in the other CS thread also. I asked there about his HU, and questioned about the (unattached) connector.

 

Alright, I just ordered up the kit as well as some other components. Let's hope I will be able to wire up the switching relay to swap between two cameras.

 

I haven't had any received any reports of this happening before but I don't know how many people with SRs have bought this from us, it seems like it should work as long as you have entune, what does seem like its probably a problem is that you don't have one of the connectors, but even then, I don't see how you would lose normal funtionality.
I'll look into it on my end and post updates here if I find out anything relevant.

 

I'm not sure how you're planning on wiring your third camera or maybe I just don't understand what or how you're trying to do it but all you would need to switch from the front camera to a second "front" camera would be a single pole double throw switch, and connect as follows...
you would have a common ground between the screen's RCA input and the two camera feeds, and the positive feed from each camera would be connected to the L1 and L2 respectively as shown in the diagram below. The screen's RCA positive feed would be connected to the "COM" in the diagram below.
The switch would simply change what camera feed your screen receives.

 

The Natika cameras aren't available in black right now, only white & chrome. Anybody using something different in black they've had good luck with?
Thanks

 

Yup, that's pretty much how I plan on doing it. I plan on taking the signal wires and putting them to pins 87 and 87A where the output will be at 30. I will combine all the return lines together as that shouldn't give any issues. Lastly putting a CH4X4 small switch on it to control which one it passes through.

 

Wow... g'luck, man. Would love to see your setup once you get it all done.

 

Damn i need this. Fackin tacomaworld

 

I'll post an update here once I get it all in and put together.

 

I placed an order sometime ago. Are they shipping out soon? I was wondering cause I havent recieved and confirmation email

 

Hey Boys, hows the camera working out? I really want to buy one, I need the easy plug and play version. Takes 2 beers to rotate the tires 4 beers to do a good relaxing oil change, how many beers you figure Id been into before this install is done?

 

Two, maybe 3 if you sit and enjoy your handy work.

 

Lets call it an even 4 seein as how I will be enjoying my handy work... Your Truck is nearly identical to mine, sand, 4door, grill, lights, no hood scoop though. Congrats on an awesome rig buddy!

 

PRE-ORDERS FOR 2020 VERSION ARE NOW OPEN!
​

 

Looking forward to getting it, hopefully the wait won't be too long Order number 5132

 

Preordered as well, order # 5133!

 

Wondering, would it be possible to pair this mod with an iPhone mirroring device? Second question, could you also wire up a manual push button to the front and rear camera in addition to the steering wheel buttons.

 

Maybe. It looks to me like the HU detects the resistance across pins 22 (SW2) and 23 (SWG) on its connector. The "Mode" button effectively shorts those pins together, giving 0 (zero) resistance. If you can determine which connector these pins are on and connect your momentary switch to the associated male connector where it plugs into the CS harness, I think it should work.

 

Here's a brief write up @bonifacio did for me a lil while ago.

 

I don’t quite understand your screen shot 100%. Can you send me the write up?