1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Front End Suspension Love

Discussion in 'Suspension' started by TheJoeBen, May 5, 2020.

  1. May 5, 2020 at 1:44 PM
    #1
    TheJoeBen

    TheJoeBen [OP] New Member

    Joined:
    Sep 12, 2015
    Member:
    #164043
    Messages:
    2
    Vehicle:
    2005 Black DCLB
    Hey everyone, I replaced the shocks (for a slight lift but I justified it financially because they were shot) but everything else on the front end is original as far as I know. I wanted to get any input or see if I missed anything that might need replacing. I do almost no off-roading these days. If the image is hard to read I have:
    • tie rods - inner & outer x2 - I'm assuming you need one inner and outer per side
    • control arm bushing kit
    • sway bar connectors
    • UCA x2 and LCA x2 balljoints

    Screen Shot 2020-05-05 at 4.26.04 PM.jpg
     

Products Discussed in

To Top