CaliRaised Switch Help

New to posting but been digging on this topic for awhile now. I have ditch lights ran to basic 3 connection toggle switch (see attached picture) that works as intended. I bought a CaliRaised LED switch and for the life of me, cannot get them to work now. If I understand correctly, the two reds are only for illuminating the switch (which I don’t care for) so that leaves the green and the black. The black off switch would go to my green. I ran both my red and yellow to the green on the switch. This gave me constant on but pushing switch would not break the circuit. What am I doing wrong? Do I have to use both reds?

 

Here is a thread that can help
https://www.tacomaworld.com/threads/ch4x4-switch-issue.607056/

 

I think you want to connect your YELLOW to the GREEN/YELLOW of the switch, your RED to the RED (closest to the GREEN/YELLOW) and your GREEN to the BLACK. I believe the other RED (closest to BLACK, is the power for the word DITCH LIGHTS).