2012 Tacoma Eibach Pro Lift Kit

They assembled them for me

 

Nice.
Josh at @Wheeler's Off-Road Inc emailed me today to let me know they are assembling my units and will have them out ASAP.
I'm still trying to decide if I want to install them myself or have a shop do it.

 

Got the front assembled and on just waiting til next Friday when they get the ome Dakar 095L leaf pack in and can install it for me.

 

Was debating for a minute if I should go with a bilstein 5125 in the rear but concluded I should just roll with the eibach since they are basically the same.

 

Yes they are and EVERYBODY has bilstein. One reason I got the Eibach.

 

I just installed the icons leafs, the ride is definitely more forgiving than stock

 

Did you remove the overload spring or keep it?

 

I removed it but I kinda regret not keeping it on, i think when I lift the front end and I'm going to add it back

 

The rest of the parts came in last night from @Wheeler's Off-Road Inc.
I dropped them off along with the truck this morning at Automotive Outfitters on Se 83rd and Foster Rd in Portland this morning.
Eibach kit on middle setting, Icon 3 leaf AAL's, front stainless steel brake lines.
Can't wait to get off work and pick it up.

 

Picked her up last night from Automotive Outfitters in Portland Oregon. Absolutely love the look and the ride. She sits as close to level as it can get without a lean spacer.
Gained 1/2" up front with the same height in back as before.
The sway bar links were frozen and had to be cut off so that added to the cost.
They also installed the 2 Red Stainless Steel front brake lines I got from @Wheeler's Off-Road Inc for no extra charge.
Here is the breakdown.
Eibach Pro lift on second clip from @Wheeler's Off-Road Inc
Icon 3 leaf AAL's "with overload left in" from Autoanything

With new Eibach lift

 

Ok I showed you mine. Let's see your bad boy.

 

Eibach set at 2nd clip and OME 095L dakar leaf pack

 

Looks great. How is it riding?

 

Rides great coming off the sport suspension. She’ll do great in Colorado.

 

Reviving the thread here! What size tires are you running on your truck ? And also what’s the weight on that bumper and has the suspension sagged any ? I have a KO bumper just like yours on mine I believe it’s around 170-185 pounds. Really debating this lift. Both yalls trucks look phenomenal.

 

I thought the first (lowest) notch was for average of 2.5" lift and the second (highest) is 3.2" + The third and fourth are for heavily front-weighted trucks. I'm getting this lift installed next week on my 2010 Taco!

 

I got a full 3" on the second notch if not a little more. I had a RC 3/2 spacer lift and the second notch on the EIbach was 1/2" higher than that lift.

 

Looking good!

Just to clarify, we manufacture this whole kit from raw tubes to powder coated coils right here in SoCal. Our alignment parts are SPC, but what most people don't realize is that other manufacturers are rebranding parts the WE make for them .

 

Also 100% made in the USA just in case anyone missed that.