Need help reassembling manual climate controls

I was installing my climate rings and like a dummy I decided to try to figure out removal on my own. I was a little off and ended up messing with the controls from the back and now my temp knob is off and so is my mode knob. Pretty much if I turn the temp to cold but not Max ac it blows cold but now if I hit max ac it’s heat and my mode controls are all different. Any help would be greatly appreciated

 

Here are some pictures

 

So I got the temp one set. It has to be in the middle of hot and cold and then the arrows match up. Gonna test out if putting the mode in the middle one and resetting the gear to make the arrows match will work

 

Update. Got it all back to normal. If you take it apart there are arrows on the cogs and under them that have to match up. You must set the control to the middle setting ( for temp that’s between head and cool at the top. For mode that’s the 3 setting from either top or bottom). Then you must adjust the small holes on the control board to match the direction on the part on the cog and everything will be back to normal.