1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Advice on changing manifold on 2005 4Runner?

Discussion in 'General Automotive' started by Mr.Tacoma, May 17, 2020.

  1. May 17, 2020 at 1:07 PM
    #1
    Mr.Tacoma

    Mr.Tacoma [OP] Well-Known Member

    Joined:
    Oct 25, 2010
    Member:
    #45225
    Messages:
    219
    Gender:
    Male
    toronto
    Vehicle:
    DoubleCab4x4
    TRD Exhaust, Side step bar & ARE cap
    Hey folks
    Seems like driver side exhaust manifold is leaking, leaks during accelerating & also at cold /high idle. Anyone changed manifold on T4R, need some advice I know it's a pain, moderate skills needed...wanna see if I can handle. Check engine light is ON as well. Haven't had a chance to run the codes yet.
     
  2. May 18, 2020 at 2:54 PM
    #2
    b_r_o

    b_r_o Gnar doggy

    Joined:
    Nov 17, 2016
    Member:
    #202672
    Messages:
    14,253
    First Name:
    Alex
    WA
    Vehicle:
    2015 DCLB
    Its not that bad, there's some vacuum lines at the back i believe, you should be able to remove the throttle body and set it aside without disconnecting the coolant lines and losing coolant.

    I wouldn't pull anything apart until you read the codes though
     

Products Discussed in

To Top