1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Help with wire identification.

Discussion in '2nd Gen. Tacomas (2005-2015)' started by dogfightink, May 18, 2020.

  1. May 18, 2020 at 4:11 PM
    #1
    dogfightink

    dogfightink [OP] Member

    Joined:
    Jun 11, 2014
    Member:
    #131802
    Messages:
    10
    Gender:
    Male
    First Name:
    Phil
    Rancho Santa Margarita
    Vehicle:
    Silver TRD Longbed
    I need a little help identifying some wire located in the engine of my 2012 Toyota Tacoma. Please see images. Looks like a rat chewed this up along with a heater hose. I replaced the heater hose but need to get the wires replaced. Does anyone know what these wires are. My Check Engine light has been on and wasn't sure if this is the problem? The truck has been running fine despite 4 of the wires being chewed off. Any help would be appreciated.
    Screen Shot 2020-05-18 at 4.00.33 PM.jpg Screen Shot 2020-05-18 at 4.00.42 PM.jpg Screen Shot 2020-05-18 at 4.00.54 PM.jpg
     
    Last edited: May 18, 2020
  2. May 18, 2020 at 4:32 PM
    #2
    Honorius

    Honorius Member

    Joined:
    Apr 25, 2020
    Member:
    #325774
    Messages:
    19
    Vehicle:
    2005 Speedway Blue X-Runner
    Looks like it goes to the throttle body, the engine does not sound different if you rev it?
     

Products Discussed in

To Top