What Have You Done To Your 3rd Gen Today?

That's exactly why I have an ugly 20# exchange tank. I can swap it for a full one at any welding gas supplier.

 

Texas sized 10-4, thank you.

 

Thanks. Baja Design Squadron Sport.

 

Playing with the grill with my time off.

 

Southern Style Offroad with stage 2 wings. They offer fully welded option now

 

Thank you. They are standard on the Access Cab. I have the SR5 AC 4cl basic truck, nothing fancy. Lol
Zim

 

@ Tacodog

The mirror I'll have available is the 5th gen OEM from a 2020 TRD Sport

 

GREAT IDEA, I love those cyclone lights for KC, they are the best!!!

 

Thanks, yes it always great to get into the woods, drink some beer, have great food, and do some shooting with good friends. Didn't upload all the pics, just the ones that I thought would give the general gist.

 

I found some more storage under the rear double cab seats. A Dremel with a cutting wheel, some safety glasses, and car door edge guard is what I used.

 

Nail in rear tire...

 

Whats in the storage?? Can you list it out? thanks!

 

Awesome. Exactly how it should have come from factory imo.

 

You can remove the little plastic pop clips, put foam tape around the edge then instal blind nuts in the holes. This secures the cargo cover super well and stops the normal rattles you get from it. Here is a picture of how I did it. You can also replace the normal latches with locks, combined with the bolts no one can get under there.

 

Looking great! Does it interfere with bed rail OEM tie downs?

 

Crudely Plastidip’d the Tacoma door emblems last night. Turned out good enough.

 

Does it do any tricks?

 

Removes money from your bank account.

 

Yup, that's the one trick that mine knows how to do!

 

Finally got around to trying out the foam cannon and I don't see where it's worth the trouble. The instructions for the foam clearly state do not let the foam dry on the vehicle. Around here you're not going to foam her up then get her scrubbed without some or all the foam drying, even in the shade in the summertime. To me it's impractical to do a section at a time. and to top it off, you need to run water thru the foam cannon after each use. This takes far to long and it continues to spit foam after the initial purge. For me, a bucket and a sponge makes more sense. I foamed it up then rinsed it off and it was like pissing in the wind.





I had to go hunt the camera after I foamed it up and by the time I did it was well on it's way to unfoaming. Initially the foam was heavy. The foam cannon does work as advertised.