What Have You Done To Your 3rd Gen Today?

Removes money from your bank account.

 

Yup, that's the one trick that mine knows how to do!

 

Finally got around to trying out the foam cannon and I don't see where it's worth the trouble. The instructions for the foam clearly state do not let the foam dry on the vehicle. Around here you're not going to foam her up then get her scrubbed without some or all the foam drying, even in the shade in the summertime. To me it's impractical to do a section at a time. and to top it off, you need to run water thru the foam cannon after each use. This takes far to long and it continues to spit foam after the initial purge. For me, a bucket and a sponge makes more sense. I foamed it up then rinsed it off and it was like pissing in the wind.





I had to go hunt the camera after I foamed it up and by the time I did it was well on it's way to unfoaming. Initially the foam was heavy. The foam cannon does work as advertised.

 

TAG sale? Is that a New England name for garage sale or yard sale? That's a new one on me!

 

Yup, that's what they call it in this neck of the woods. Great opportunity to meet people who want to give you nothing for something!
I'd sooner make a big pile in the driveway and test out 4 wheel low!


Truth be known I've actually done so before only not in 4 wheel.

Then put it at the end of the driveway with a FREE sign on it........, long story?

I have my moments.

 

TAG, You're it!

 

New wheels and tires. Pretty stoked.

 

Took a pic of this today since I installed it yesterday...

 

Put some grille lights on her today

 

Burned through the clear coat on my 3 week old TRD OR trying to buff out this scratch (pic is after touch-up, pre clear coat burn). Learned how thin factory clear coat actually is .

Truckless for a week since it's now in the body shop with a $900+ repair (highest quality shop around). Lesson learned! Take it to the pros first or leave it alone after touching up lol.

 

Well I ride bikes. And I have an affinity for lock-on grips. Discovered https://www.gogettagrip.com/ and their magical adapters. I tested out their most recent MT offering for yotas: https://www.gogettagrip.com/collect...ota-6-speed-manual-blank-adapter-2005-to-2016 and it fits real nice. Could use some double sided foam tape to secure the chrome bezel, that's about it.
Get your shift together.

 

You can find black overlays on eBay that work great for about $50 and they’re just 3m stuck on. Honestly little more permanent but most of these trucks Shiism never have chrome emblems anyway lol

 

Yeah i've seen those too! Part of the fun with spraying them is drinking a beer between each coat. 18 coats is usually a good place to call it

 

18 coats each emblem?

 

It was a monday... so I actually only did 5 base coats and 1 clear coat.

 

That’s a whole lot more than plasti-dip. I also don’t like that most of the overlays I’ve seen don’t have complete cut outs in the middle of some of the letters.

 

Hi
It is the oem rails. When i put them across they felt super weak. I would not trust strapping my kayaks to it. So i added the aftermarket crossbars. It feels way more sturdy and i can rock the vehicle now.

 

Well executed and great photos. Thanks for taking the time, I will likely do the same but might add some dynamat in the process.

 

Got my 2020 Off-Rod Grill on of FB Marketplace and got it over to the body shop to get painted matte black instead of that OEM gunmetal grey.

 

I have two miliary Scepter Fuel cans that I been looking to secure to the bed of my truck so I came up with this, please see photos. I used the Smittybilt Jerry Gas Can Holder (Amazon for $30), Toyota Bed Rail (Toyota dealership $30.51) and Rago Fabrication Toyota Bed Rail Recovery Board Mounts ( I had them already, think I paid $80 with discount). I used the existing holes on the board mounts to secure to the can holder.

If anyone else know of a better solution, specifically to Scepter Military cans, that is lockable, please let me know.