TACO GARAGE - Any camera - anytime, plug and play, steering wheel controlled. 2020!

The shims are part of the kit https://www.ebay.com/p/18025180418?...kn26Dh-HzhwyIwN743hurHPMUez8mRYxoCiPAQAvD_BwE

the bracket is available from Toyota, but would need modifying. a simple strip of plastic or metal could be used to make your own bracket.
In my head it appears quite a simple Project.

You may want to Wait and see what bracket @FreshMexicanTaco comes up with. Hopefully he will save a lot of head scratching... hopefully he’s going to be able to included it with the 2020 package?

 

I guess we need @FreshMexicanTaco to speak up here

Also no shims with just the camera itself. I have to see if I can find them somewhere.

And that kit is no longer available it seems.

 

Regular Levelling plastic shims you can get at home improvement store would work fine with a hole drilled and shaped To your liking...

 

Well I guess I need an RCA too. This camera came with, well, just the camera.

 

Why don’t u just go with this op’s kit, plug and play with steering wheel control, super slick...

 

I have the kit already, saw this AFTER I had already ordered everything.

 

I’m reading through the post right now I’m a little lost...

 

I think the easiest way to put is some folks are curious what you're coming up with as far as a mounting bracket for the camera (assuming it'll be specific to the one you sell in your store). Maybe....

 

I Received the new model but unfortunately I have not been able to make it work, I don’t get a feed from any of the cameras, I am working with the manufacturer to try to get them working...

use Pre25 for the $25 discount on anything, it will only work with your account and those who pre ordered the 2020 camera. Also, since the 2020 isn’t working as of now, if you or anyone wants a refund I can do that but I’m confident we’re gonna get tot to work so if you want to wait we could do that too obviously. I just don’t want to send them out yet.

 

I ordered mine last night could you refund for the camera? I rather wait. Still want the dmm though order #5517

 

I finished the first bracket, these images are the first prototype it’s now reached production ready status, I’ll picture that today and post them later.
It bolts on to the stock mounting locations for the multi terrain monitor camera using 2 screws.

 

How much @FreshMexicanTaco ? I want order one when ready.

 

Looks good! Shame the system is not cooperating but I appreciate you doing the leg work and checking compatibility.... Cheers!

 

Are you making a bracket for the 2016-2019 TRD Pro grills?

 

Hey I have another question. Couldn't I just install the Natika camera on the front upside down? I am sure I can rotate the image correct? If I install it under the Toyota logo wouldn't it look normal or would the image be l/r backwards and/or upside down?

 

Ah thanks man!!!! I saved that image. Do you think the Natika camera would fit here? I imagine I have to cut the post to get the nut on the back.

 

You could probably use the bracket the FreshMex has designed. Or use a piece of aluminum bar stock to design your own.

 

I wonder how thick and wide the aluminum flat needs to be. Lowes has them and I can order one.

Hah this may be too much but I ordered it anyway:

https://www.lowes.com/pd/Hillman-3-ft-x-2-in-Aluminum-Solid/3053609

 

If I had to guess, I'd say that piece is both too wide and too thick. Probably 1.5" wide and 1/16" thick would be more like it. But I don't have a 2020 grille so I'm really not sure. But the piece you ordered, being 1/8" thick, is probably not going to allow the bend radius you'll need.

Also, take a look at what this guy is doing . . .

@THE_KiRRAx