2017 Reverse Camera issue

My camera has stopped working after I did amp install. Which fuse controls the camera. I have checked and everything is connected in the back of the factory radio. (Non jbl). Could I have tapped the wrong wire and made it malfunction . Or could I have tapped into the camera while running the remote wire that is causing the camera not to work. Any help is appreciated . Thank.

 

I would look at you fuse covers and your manual for fuses that are marked camera/BCKUP/Reverse. What wires did you tap for an amp? Did you run power from your battery to the amp directly? An amp will draw a ton of well AMPS, and could destroy wires that you may tap for it.

 

Will do. Yes I ran power to the amp from the battery. I tapped into the wiring harness to run the speaker wires. But I did tap into a wire to run the remote but do not remember what that wire is.