1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Trying To Fit In With The Cool Kids Build

Discussion in '2nd Gen. Builds (2005-2015)' started by dpak, Jun 3, 2020.

  1. Jun 3, 2020 at 6:40 PM
    #1
    dpak

    dpak [OP] Well-Known Member

    Joined:
    Jul 8, 2010
    Member:
    #39947
    Messages:
    358
    Gender:
    Male
    Richmond, VA
    Vehicle:
    09 4x4 TRD Offroad DCSB
    Toytec/Eibach coils w/ 5100's set at 0, Toytec 2.0 Aluma Rear Shocks, Toytec Boss Leaf Springs, TRD Catback Exhaust, SCS F-5 Matte Gray Wheels, Elusive Elements Mesh Grill
    I have a 2009 DCSB 4x4 and just doing the bare minimum to standout from the stock trucks but just enough to fit in with the modified trucks.

    2011 at 40K miles: I updated the suspension to Toytec/Eibach 1.6" coils with 5100's at 0, rear 5100's, TSB leaf, and some MB branded wheels.


    2020 at 180K miles: Fast forward 9 years and 140K miles later on the old and saggy suspension parts but with SCS F5 matte gray wheels (added in 2013) and here it is:


    Measurements from center hub to fender: DF 21.25" PF 21.25" DR 22.75" PR 22.75"

    A refresh of parts was long overdue. I had good luck with Toytec/Eibach 1.6" coils with 5100's at 0, so went with those again. For the rear, went with Toytec 2.0 Aluma shocks and the Toytec Boss leaf springs.


    Measurements from center hub to fender: DF 21.75" PF 21.75" DR 24.50" PR 24.50"

    Almost on my way to the cool kids lunch table...
     
    tinker_troy likes this.

Products Discussed in

To Top