Bedside Decal

Hey all,

I know how much you guys love voicing your opinions so I thought I'd solicit some. I poorly photoshopped a bedside decal design and was hoping to get some input on design before I move forward and cut the vinyl.

The original bedside decal wasn't conducive to mall crawling and instragram posts so it has to go.

 

Need to include your Instagram handle into it.

I dig it. What about making the font have the same angle as the cut at the top?

 

I was worried the angle would be too sharp and make it look weird, maybe I should soften the angle going into the fender flare to match it easier. The instagram part was a joke I don't actually have one or I probably wouldn't be able to help myself and add it.

 

I like it..........................

 

It's tough. You have the angle of the top of the tail light which looks like you are just about matching with the text.

Totally joking about the instagram handle too.

 

I like it but maybe under the TRD make it have “cracks” where the paint shows through a little as it flows towards the muffler. Kind of like the pro decals if you will.

 

I have nowhere close to the skill or tools to do anything beyond letters, which is already probably a stretch

 

You're already failing the first rule of mall crawling

 

I could put the trd in-line with the tail light making it a bit smaller then have the angle match going to the fender, I'll have to re-do it and try it out with all the same angles.

 

The quality of the shop went down but this is the other version I came up with using that feedback.

Old vs New

 

Tough! I think it looks good overall

 

I like the old one better...but just my opinion

 

The first looks best IMO!

 

Definitely the first one in matte black.

 

I'd try the original design, but angle the TRD to match the vinyl cut... maybe reduce the TRD size to fit closer to the cut

 

It looks too heavy under the TRD to me. If you're somewhat married to that design, you could soften it with a gradient:

 

This is currently what I'm working with but its not finished yet, I want to go back to the original design with just a softer angle to the fender and leave TRD where it is right now.

 

It definitely has to be matte black since the tailgate is already wrapped

 

In that case, I'd cut the top off the black on the sides even with where it is on the tailgate so it lines up.

 

That's a good point, I could move the TRD down and have the wrap start almost like it's coming out of the tail light.