What Have You Done To Your 3rd Gen Today?

112Q. Minimum

 

Does purchasing my first Taco (3rd Gen) count?

 

No

 

Welcome to the forum from Eastern North Carolina!

Yep, it counts.

 

9” fits in the entune premium OEM bracket perfectly. For the standard entune, you have to route out quite bit of plastic. You have the premium bracket if you do not have physical buttons. If you have actual buttons for functions of the entune stereo, you have the standard bezel. I used the metra kit and cut some away on the side brackets, but a guy in another post used the factory brackets and drilled some extra holes.

 

Anybody get a set of these?

they are marketed for Jeep JL/JT Wranglers but I was thinking they could be easily put in a Taco. It seems like a good idea for my rear passengers.

https://www.gpca.us/shop/gp-back-grip-pro/

 

With the idatalink maestro rr2 module and the TO2 harness, it was fairly straight forward. Get the speaker wires connected first. Those are obvious in the instructions and gets them out of your way. Then move on to the rest. The hardest part routing the cables and trimming the metra side brackets to fit flush. Not hard. But had to give it a few extra trims to get it flush

 

I bought some awhile back from a guy on TW. They were braided paracord. People in the back like them.

 

Finally got around installing some noico 80mil under the storage compartment.

 

Welcome to TW! Prepare to empty your wallet!

 

Oh my God, it worked! It looks and feels like real Rhino Lining, but it’s a giant sticker.

 

Lift went in today. Front gained 1.75" and rear got 2". Truck rides real nice but I'm gonna play with the rebound adjustment a bit more to find the sweet spot. Thanks to @Man of Steel TRD and @TailHook for helping with the install and Man Of Steel of letting me occupy his garage for the day.

No vibes or other issues as of yet. All that's left is to swap in my U bolt flip kit and Timbren rear bump stops when the new u bolts arrive.

Suspension is Tough Dog 40mm Foam Cells front and rear with their light spring in front. @HeadStrong Off-Road was sourced for the rear AAL and it gave the bed a much needed boost. Tailhook was jealous of the new AAL pack design.

 

Got a link? That looks hella sweet!

 

Installed Rough Country HD2 Running Boards

 

Installed a Peregon cover. Looks good and was fairly easy. I watched their videos first. Only complaint is that the two videos don’t cover the type of brackets supplied. Oh and the rail mounting bolt should be a bit longer. They work but a bit more real estate would be nice.

 

I’ve got a pair. Work well and help wife and kids in and out. They like them.

 

I saw someone in this thread (I think) who installed a dongle to make his 2020 android auto work wirelessly. If that person reads this, or someone else knows, where can I find this product?

Been looking around and I am not sure what was used. Search is showing me people who have added android auto to 3rd gens that didn't come with it, but I cannot find the post where this was discussed.

 

Thank you for your services sir!!!

 

Anybody have just a leveling kit installed without a rear lift? If so what do you have and do you like it?