HELP! Dome light fuse location for 2nd gen tacoma

Yeah still trying figure out where the fuse is for the dome & maplights on a 2nd gen Tacoma.
I screwed the Interior LEDMod install! please check my first post from earlier. are leds really so sensitive! it was the tacomabeast interior led kit. Pleas help if you know any solutions! Thanks in advance!
I change polarity ( flipping around bulb) i tried changing back to the og bulb but i lost 1 of the map lights : (

 

https://www.carcarekiosk.com/video/...rew_Cab_Pickup_(4_Door)/fuse_interior/replace

There are a few 15-30 second videos on the right side

 

AAhhh! Okay, okay I just found the missing map bulb replaced the leds with the original bulbs, no still no luck! the og bulbs dont work at all, funny cause the leds work but just are very dim compared when i first installed the map light leds!
I also noticed the clock reset last night it reads 1:00 i think from fiddling around last night! Please reply if you have any clue to whats going on. Thanks!

 

Just a Quick update! It was the fuse! FYI: 2nd gen dome light fuse is under the hood, 7.5 amp tiny low profile, bottom lower right of the box.
long/short, apparently mismatched led bulbs(different, Map, & Dome lights) can blow a fuse! Luckily, I purchased a TacomaBeast interior Led kit later, I just got inpatient & bought mismatched colored LEDs on Amazon, which blew the fuse upon install! All Is well Now with the matching Tacomabeast kit! THANK GOD!! and you guys for your help! I was afraid I blew a relay or a circuit board, feared trip to the dealership! but thank Y'all for helping!