Custom Threshold still plates GB1

I am offering these Threshold plates in batches of 5. They go on still area of the step. From what ive seen, only the TRDPRO package has a plastic OEM one but most are bare metal. The Threshold plates have sharp aggressive tire inspired threads which prevent you from slipping when you step up to reach gear in your roof rack. The panels are made out of 1/8" aluminum.

The process consists of painting the panels black with multiple layers, followed by a clear. The panels are then sanded down to expose the aluminum on the tread. Two final coats of clears are painted and then 3m tape is applied to the back. On the TRD PRO version you have two more stages, after the above is done the letters are taped off then painted in a gunmetal color and the PRO is painted in red. A final sanding is done followed by two more clear coats. It takes between

Right now I will only be offering then in a batch of 5 being that they take me about 3hrs to make a set and I dont want to overwhelm myself with orders. The pricing will be as follows:
(TRD one is not shown but it will look like the TRDPRO minus the PRO and will be black)
Tacoma or TRD fronts are $225
TRDPRO for the fronts are $250

Tacoma or TRD is $395 for the set of 4.
TRDPRO is $420 for the set of 4.

If you want to install screws vs tape i can make changes on the plate so we have recessed screws to use. Feel free to PM me if you want to order.

P.S.
I am in Guam stuck in quarentine for another week and then ill be working on a navy ship for a few weeks. I plan on being back in the states in around three weeks.

Thanks guys!!

 

Another close up. Its right against the rubber molding.

 

Pretty nice, I would be interested in a set without any lettering if you ever hit another batch.
Just vhb tape holding then on?

 

I can make it with out any lettering with the trdpro or tacoma tread design shown.

 

Those thing look pretty sweet