1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

2015 Taco spark plug confusion???

Discussion in '2nd Gen. Tacomas (2005-2015)' started by dfertig84, Jul 1, 2020.

  1. Jul 1, 2020 at 8:59 PM
    #1
    dfertig84

    dfertig84 [OP] Active Member

    Joined:
    Jun 20, 2020
    Member:
    #332051
    Messages:
    25
    Gender:
    Male
    I have a 2015 Tacoma TRD off road with the 4.0 V6 engine that has 32,000 miles. After looking around online my research tells me that I was due for a spark plug change at 30k miles however when I asked my local Toyota dealership service department they told me I wont need to change my spark plugs for probably another 50k+ miles... well which is it?

    If I do need to change my spark plugs I'm seeing a lot of smart sounding folks saying to just use the regular cheaper Denso copper plugs... so I guess I shouldn't use the platinum or iridium plugs? If so is there difference between:

    this - https://www.amazon.com/Denso-K20HR-U11-Traditional-Spark-Plug/dp/B0012Q4H96
    and
    this - https://www.amazon.com/Toyota-Genuine-Parts-90919-01235-Spark/dp/B004T1PLDW

    They look the same to me but the first one is cheaper however Amazon says that it wont fit my truck. (please feel free to send me a link to the best spark plug for my 2015 V6) Thanks in advance for your time.
     
    ardrummer292 and TXpro4X4 like this.
  2. Jul 1, 2020 at 9:02 PM
    #2
    TXpro4X4

    TXpro4X4 Fuck Cancer!

    Joined:
    Oct 29, 2011
    Member:
    #66093
    Messages:
    27,895
    Gender:
    Male
    First Name:
    Bryan
    Costa Mesa, CA
    Vehicle:
    2011 TOY
    Toy Stuff..... Faktor Amber lights on in the grill. Under front bumper led rock lighting. Center counsel c.b mod with under the hood p.a. Anytime foglight mod. R.G.B tape light for inside toekick lighting. Front and back. Front weathertech floor mats. De-Baged except TOY on tailgate. FJ style 6 speed shifter knob. Rubber tacoma bed mat. Trd exhaust. Trd 16in beadlocker style wheels. Electrical a/c 115volt plug/usb mod next to passenger knee. Fox 2.5 coilovers. Icon 2.0's in the rear. Rear locker any-time mod. Abs kill switch mod. All Pro ISF front skid Pelfrey built front differential skid Baja design pro pods Rigid pods CBI pods brackets Mobtown tailgate guard RIP Mobtown Caliraised rear amber pod lights CJ Jumper- map, running, amber fog, reverse, and license plate led bulbs Pedal Commander
    Change the plugs at 30k! Says that shit in the manual!
    4 bangers are every 50k i think.
    Buy the $6 plug. The other might not be gapped correctly!
     
    Island Cruiser likes this.
  3. Jul 1, 2020 at 9:20 PM
    #3
    Island Cruiser

    Island Cruiser TVita

    Joined:
    May 20, 2012
    Member:
    #79166
    Messages:
    3,910
    Gender:
    Male
    Kauai
    Vehicle:
    Baja
    x2
     
  4. Jul 1, 2020 at 9:22 PM
    #4
    joeydurango

    joeydurango Nightfall Overland

    Joined:
    Sep 21, 2019
    Member:
    #305951
    Messages:
    400
    Gender:
    Male
    SW Colorado
    Vehicle:
    Heavily modified 2015 TRD w/Drifter
    I just changed the plugs in my 2015 V6 last weekend. Yep, change them every 30k. I used the Denso K20HR-U11 plugs, got them at the O'Reilly's down the block from my house. These are what are used stock (well, for half the engine anyway - NGK used for the other three cylinders stock, don't know why). They were all gapped very slightly differently but within specs... I re-gapped everything to 0.041 just because. Runs like a top, no issues. Make sure you use anti-seize on the new threads, and change your plugs cold!
     
  5. Jul 1, 2020 at 10:11 PM
    #5
    ardrummer292

    ardrummer292 500k or bust

    Joined:
    Feb 27, 2020
    Member:
    #320484
    Messages:
    1,139
    Gender:
    Male
    First Name:
    Austin
    Virginia Beach, VA
    Vehicle:
    2015 DCLB V6 A/T 4x4 1D6
    Overbuilt daily driver
    I'd take the dealership's advice with a grain of salt, since a lot of their employees aren't exactly credible sources of information. I have heard a couple whoppers from employees who speak before they think, which is what spurred my initial distrust. I'm not trying to imply that the All-Knowing Internet(TM) is correct 100% of the time, either. It's generally worth doing a bit of research yourself to figure out what most people do. The maintenance spreadsheets I shared in your other thread reflect recommendations from crowd-sourced "tribal knowledge" as well as my own credible sources, @crashnburn80 and @EatSleepTacos being the foremost two.

    As far as parts go, I have been ordering from this site:
    https://www.toyotapartsdeal.com/oem/toyota~plug~spark~90919-01235.html
    A bit more expensive than Amazon and the like, but I feel confident knowing I'm getting genuine OEM parts instead of some knockoff.

    4 cylinder engines use iridium or platinum plugs (I think), which is where some of those recommendations come from. You've got a V6, so different parts are recommended.
     
    12TRDTacoma and EatSleepTacos like this.
  6. Jul 1, 2020 at 10:30 PM
    #6
    TnShooter

    TnShooter The TacomaWorld Stray

    Joined:
    Sep 2, 2010
    Member:
    #42625
    Messages:
    17,095
    Gender:
    Male
    First Name:
    Deogee
    Vehicle:
    07' TRD Off-Road, Auto
    STOCK
    I’ve never seen a complaint when using OE Recommended - Copper Core Plugs (This is what I used)
    Yes, some have used Iridium Plugs and had good results. Other have had issues. (Your choice)
    30K is the recommended interval for the 4.0 V6.

    IIRC, the 2.7 I4 (2tr-fe) is 100k recommendation on plugs.
     
    Jimmyh and Island Cruiser like this.
  7. Jul 1, 2020 at 11:05 PM
    #7
    crashnburn80

    crashnburn80 Vehicle Design Engineer

    Joined:
    Jun 6, 2015
    Member:
    #156893
    Messages:
    14,562
    Gender:
    Male
    Kirkland, WA
    Vehicle:
    2003 DCSB TRD OR
    Go Hawks!
    Your dealer service person is confused. The Tacoma 4.0 V6 service spec specifies a 30k plug interval change with traditional Denso copper plugs. Iridium plugs are spec'd for supercharged applications and listed as 100k service change interval. My iridiums in SC application were toast at 50k miles, with electrodes completely gone (granted I'm running SC mods). The service tech could also have been thinking of 3rd Gen 3.5 V6 which I believe specifies 60k mile plug changes. I believe the 2.7 is different as well. Regardless, service spec for the 4.0 says 30k mile plug changes with basic Denso copper plugs, so that is what I would use.
     
    12TRDTacoma and ardrummer292 like this.
  8. Jul 2, 2020 at 3:33 AM
    #8
    sgtnewundies

    sgtnewundies Well-Known Member

    Joined:
    Apr 2, 2014
    Member:
    #126843
    Messages:
    649
    Gender:
    Male
    First Name:
    Eric
    Florida, Citrus County
    Vehicle:
    14 trd sport red
    Working on it now....UNDER CONSTRUCTION
    I would change them no later than 50,000 miles. I put NGK Iridium in mine and they are rated for 50,000. Next set will be the Lazer Iridium which is rated at 100,000 miles. They have two different plugs in your truck the NGK and the ND. I believe that is part of the reason they want them out early along with the emissions system efficiency. You don't use anti-seize on the plugs.
     
    Hank Heel likes this.
  9. Jul 2, 2020 at 6:20 AM
    #9
    ardrummer292

    ardrummer292 500k or bust

    Joined:
    Feb 27, 2020
    Member:
    #320484
    Messages:
    1,139
    Gender:
    Male
    First Name:
    Austin
    Virginia Beach, VA
    Vehicle:
    2015 DCLB V6 A/T 4x4 1D6
    Overbuilt daily driver
    I've heard varying reports on this as well. From what I understand, NGK plugs come with anti-seize already applied. Denso plugs do not. Am I off base here?
     
  10. Jul 2, 2020 at 6:25 AM
    #10
    Sandman614

    Sandman614 Ex-Snarky TWSS elf, Travis #hotsavannahdotcom

    Joined:
    Oct 26, 2010
    Member:
    #45273
    Messages:
    35,538
    Gender:
    Male
    First Name:
    Tim
    Garner, NC/Boone, NC
    Vehicle:
    '06 SR5 Off Road
    ARB Front Bumper, Projector Headlights w/Slimcubby 4300K HID's, Oznium LED's, LED taillights, DIY Washable Cabin Moose Filter, Sockmonkey SR5 Off Road, Aux Audio plug, OME 886x, OME Nitrochargers, Wheelers 3 Leaf Progressive AAL, ImMrYo Rear-View Mirror Lift Bracket, Dodge D-Rings
    I don't recall my NGK plugs having anything on the threads
     
  11. Jul 2, 2020 at 6:55 AM
    #11
    spitdog

    spitdog Well-Known Member

    Joined:
    Sep 2, 2014
    Member:
    #137440
    Messages:
    3,686
    Gender:
    Male
    Vehicle:
    2015 Access Cab V6 4x4 SR5 MGM
  12. Jul 2, 2020 at 7:20 AM
    #12
    spitdog

    spitdog Well-Known Member

    Joined:
    Sep 2, 2014
    Member:
    #137440
    Messages:
    3,686
    Gender:
    Male
    Vehicle:
    2015 Access Cab V6 4x4 SR5 MGM
    No your not.
     
    ardrummer292[QUOTED] likes this.
  13. Jul 2, 2020 at 7:24 AM
    #13
    spitdog

    spitdog Well-Known Member

    Joined:
    Sep 2, 2014
    Member:
    #137440
    Messages:
    3,686
    Gender:
    Male
    Vehicle:
    2015 Access Cab V6 4x4 SR5 MGM
  14. Jul 2, 2020 at 7:27 AM
    #14
    ardrummer292

    ardrummer292 500k or bust

    Joined:
    Feb 27, 2020
    Member:
    #320484
    Messages:
    1,139
    Gender:
    Male
    First Name:
    Austin
    Virginia Beach, VA
    Vehicle:
    2015 DCLB V6 A/T 4x4 1D6
    Overbuilt daily driver
    Sounds like I was on the right track. Denso says to avoid screw thread lubricant. I assume anti-seize would fall into that category? They don't say anything about anti-seize specifically, unlike NGK.
     
  15. Jul 2, 2020 at 7:33 AM
    #15
    spitdog

    spitdog Well-Known Member

    Joined:
    Sep 2, 2014
    Member:
    #137440
    Messages:
    3,686
    Gender:
    Male
    Vehicle:
    2015 Access Cab V6 4x4 SR5 MGM
    Yep, denso just says basically any lube may cause you to over torque. So they just say don’t use it to be safe.
    Now if you wanted to use it, just reduce your torque by 20%
     
    ardrummer292[QUOTED] likes this.
  16. Jul 2, 2020 at 7:41 AM
    #16
    12TRDTacoma

    12TRDTacoma Powered by Ford, GM, VW, and Mercedes

    Joined:
    Aug 20, 2012
    Member:
    #85133
    Messages:
    16,533
    Gender:
    Male
    First Name:
    Rob
    Concordia
    Vehicle:
    12 TRD Sport DCLB 4x4 Supercharged
    Boosted
    K20HR-U11 are heat range 6 copper cored plugs and correct application for your 2015 2nd gen.

    Iridiums are a no no on this engine unless boosted, they are known to cause some weird running conditions sometimes if installing into an NA engine. Why that is, I have no idea.

    Run them as you need to but be aware that correct service interval on these are 30K and is such the case on any copper core based plug. I have seen others stretch it out to 50K, but I wouldn't, as it is possible for the electrode gap to start opening up past factory specs. You could always remove and gap them, but for the work involved and how cheap coppers are, why go through all that hassle just to save $20 when you've already gotten great service life out of them.
     
    TnShooter and crashnburn80 like this.
  17. Jul 2, 2020 at 7:53 AM
    #17
    dfertig84

    dfertig84 [OP] Active Member

    Joined:
    Jun 20, 2020
    Member:
    #332051
    Messages:
    25
    Gender:
    Male
    Appreciate the advice, I'll go ahead and order the OEM plugs and get it done asap.
     
    ardrummer292 likes this.
  18. Jul 2, 2020 at 8:24 AM
    #18
    ardrummer292

    ardrummer292 500k or bust

    Joined:
    Feb 27, 2020
    Member:
    #320484
    Messages:
    1,139
    Gender:
    Male
    First Name:
    Austin
    Virginia Beach, VA
    Vehicle:
    2015 DCLB V6 A/T 4x4 1D6
    Overbuilt daily driver
    A damn shame, but it is what it is. I'd totally install 100k mile spark plugs if I could get away with it. Maintenance sucks, I'd rather be doing literally anything else.
     
  19. Jul 2, 2020 at 9:05 AM
    #19
    12TRDTacoma

    12TRDTacoma Powered by Ford, GM, VW, and Mercedes

    Joined:
    Aug 20, 2012
    Member:
    #85133
    Messages:
    16,533
    Gender:
    Male
    First Name:
    Rob
    Concordia
    Vehicle:
    12 TRD Sport DCLB 4x4 Supercharged
    Boosted
    I know it sucks but hey if you want to play you gotta pay, that's the name of this game. If you take care of it, it will take care of you.
     
  20. Jul 2, 2020 at 12:30 PM
    #20
    Accipiter13

    Accipiter13 Well-Known Member

    Joined:
    Apr 5, 2012
    Member:
    #76325
    Messages:
    958
    Gender:
    Male
    California
    Vehicle:
    '11 DCLB 4x4 Sport
    30k recommended. I’ve pulled plugs from my families 4.0’s at 40-60-80k intervals and none of them looked particularly bad. 30k is an easy interval, but don’t sweat going 40-50 either.
     
    ToyoTaco25, birry and winkel like this.
To Top