Anyone in east bay have a tacoma tie rod end (blown or not) for a test fit

Hello,

I am looking to see if someone has a tacoma tie rod end, blown or not, that I can test fit the taper on a different vehicle knuckle.

I have a set of spare knuckles sitting in a box so it would just take a minute.

Oddly enough, getting heim misalignments with a taper or uniball misalignments with a taper made is alot easier said than done. So it would be easier if I can find a vehicle that shares the taper and then just get parts for that.

(For my UCA uniball pins, I had to send a set off to terrible herbst machine shop and they machined a pair down as a favor and it was not cheap, rather not have to do that again for the steering)

I am in Concord Ca... Thanks!

 

I’ve got spares in Benicia.

 

I have one on it's way to me. should be here by EOD Wednesday.

 

Anderson, I have got to find a time to shoot out to benecia!

There is also Toyota pro in concord, I’m going to shoot over there and see if they might have a trash one I could look at and test fit. (I just thought of that while typing)