T.O.R.X Fabrication

How much for a cmc on 3rd Gen?

 

So a lot of people are looking into the coastal bumpers. Here are a few that I have done. If you have any questions let me know.

I will have better pictures of the 3rd gen Tacoma rear once I put it back in the truck waiting for paint to dry.

 

I like it. I have been debating on what to put on my runner in the back. I will check out the costal stuff, don’t know anything about it.

 

So I have had a few people asking for the GX front bumpers so here is one that is almost complete.

 

Clean bro! Sick!

 

not bad for the full size bumper.
tacoma full size bumper are ugly as sin.

 

Finally someone else agrees. I have yet to see one I like.

 

These are JD Fabrication spindle gussets that are in my 3rd gen Tacoma. The fit of these are awesome.

I have a set of 3rd gen Tacoma spindles and 5th gen 4runner spindles that I can put whatever gussets on and then swap them out for your stock spindles for $250. This will be less downtime for your vehicle. Let me know if you are interested in a set.

The JD Fabrication don’t work with sway bars. I will be putting total chaos gussets on the spindles I have and will have them available to swap soon.

 

Looks beefy!

 

nice work

 

I can attest to the quality/efficiency of @marinemonkey 's work. I had him do a simple job - grinding a mm or so off of a hub ring. If I have any other projects on my truck, I'll def reach out to him again.

 

Awesome sauce from @marinemonkey

 

I would be interested in some sliders for a 3rd gen. Have you done any of those?

 

I am currently not making sliders. But if you want some cheap ones that are weld on. 4x innovation look really good on the 3rd gens

 

Are you in canton? How much to weld on some sliders for me?

 

Yes I am in Holly Springs/Canton. I will send you a PM.

 

A few recent events…. This is for a 5th gen 4runner to run a 12” universal shock.

 

Cab mount relocation with DRT Fabrication kit

 

How much do you charge for the relocation labor wise?

 

sent you a PM. Sorry for the delay in response.