Yet another alignment question

I’m getting ready to install Eibach stage 1 2” lift with JBA’s uca when I take it to the alignment shop JBA supplied alignment #. Do these seam right for my lift camber0.5 L/R caster 3.1 L/R toe 0.8 L/R Thanks

 

I'm assuming you are expecting numbers close to that. Do not show up to a shop and expect specific settings.

 

might want to tell the tech what you want or they will just put your caster to spec. which is like 2.

 

Those are the # JBA supplied I’m asking do I show the alignment shop the numbers an ask to get as close as possible

 

Tell them to get toe and caster in spec and then ask for caster as high as possible. With my JBAs I have 4.7° of caster.

 

Thanks you that’s what I needed to know