1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Airbag Removal - Reinstall

Discussion in 'Audio & Video' started by Vince05Taco, Jul 13, 2020.

  1. Jul 13, 2020 at 7:19 PM
    #1
    Vince05Taco

    Vince05Taco [OP] Member

    Joined:
    Dec 12, 2019
    Member:
    #313161
    Messages:
    17
    Gender:
    Male
    First Name:
    Vincent
    Vehicle:
    05 Tacoma
    The dumbass (I’m the dumbass) owner before me had done some work on the truck apparently. He disconnected the airbag by prying the connectors out of the airbag leaving a good chunk of the clock spring tabs left within the airbag inserts. For 2 hours I terrifyingly removed them broken connectors with little picks. After that I tested to see if new clock spring wires can connect to the airbag, and all is well.
    So, the new clock spring is in, and the battery has been disconnected for at least 5 hours. Is there anything to else to do before I connect the installed clock spring to the airbag? Any info would be greatly appreciated.

    Not holding you responsible for any issues. Just seeing if I’m missing anything.
     
    Last edited: Jul 13, 2020

Products Discussed in

To Top