What Have You Done To Your 2nd Gen Tacoma Today?

That connector is fine, no signs of being burnt or corrosion.

 

Lol Ride Height Adjustable

 

Nicely done! I did the front doors, front floorboard, and rear cab wall when I put some audio in my truck. All done about the same as you. I need to go ahead and do the rear doors and the ceiling.

Just the bit I did made a huge difference in cabin noise.

 

Behind my house there is a vacant piece of property
I sure i'm the only one who has ever driven back there
Its sandwiched between a stream and rail road tracks
I only have 1 neighbor and the land is only aces sable from my back yard
I would buy it but its a fllood plain and the taxes are over 3 grand. (Dam Jersey)
Any way i spend about 2hrs digging out a rock that I used on the front of my property.
It 3' x 2' x 20" high

 

Really want to do the tweeters......

 

You never would have been able to do that with a 3rd Gen

 

I fixed it, loose connections on the back of the speakers. PSA make sure you test the speakers before putting everything back together when applying sound deadening!

 

This would be nice somehow for an RTT setup. Lower it for the drive out to camp and raise it when you arrive. Adjustable so you don’t have to fight the truck and leveling techniques.

 

Really the only part I'm interested in is the tail gate damper .... Lol and it looks like the only part that is undamaged

 

Do it. Super easy. Hardest part was the July heat and not breaking those damn plastic panel tabs on the doors.

 

Nah, not at all. Lots of good documentation on here and videos by members. If I can do it, then anyone can.

 

???

 

Got a BAKFlip MX4 through @GotExhaust. Ordered last Thursday and got it in the mail today, would definitely recommend them.

 

Wash, clay, and wax. Road trip coming up. I'll do the trim and windows closer to the date.

 

Just finished my 2006 5 lug Tacoma Build
- Fat bobs lift kit
-265:75 r16 falken wildpeak all terrains
- pro comp rims
- spyder headlights from Tacoma beast
- Acanni cyber black taillights
-black box removal mod and used a hair dryer to remold the plastic, I cut holes with a drill to fit the screws previously used with the black box
-new ac control knobs
- weather tech avm floor mats

 

Mounted some Ram Balls to hold phones. Finally mounted up the MaxTrax in the bed. Started working on the Anytime Camera install but then rain started...

 

3d printed? You could sell those pretty quick on here....

 

That's the eventual and hopeful plan. Have a few more adjustments to make to it. Probably one more prototype.