Need help pls, new guy here.

I have a 2017 Toyota Tacoma with a 4in suspension lift. I’m trying to get a new wheel set up and was wondering if I could clear 18X12 with 33’s with only minor plastic trimming. I really do not want to do cmc but if that is the only choice then I guess i gotta do it.

 

would have to go higher. 6" could probably clear 12s on 33s. at 4" youre gonna have to do way more than minor trimming.

 

18X10 -24 offset with 33’s, Would I still need to do a cab mount chop with this set up?

 

10 is gonna be close. especially on 33s. should be doable though.

 

Go 17” or 16” wheels. More side wall IMO

 

If your on a factory uca more than likely will rub. May need to get a high caster uca to help with alignment numbers.

 

here (disregard the xrunner on top, thats not part of the topic lol.) my 2013 tacoma when i was all into reaching the sky lol. these wheels was 18x10. i think the offset was -24. tires was 32s.didnt have to trim anything cause in turn my truck was lifted 9". conversely, heres my 2013 4runner. this badboy is more inline to what youre trying to do. this one was lifted 4". wheels was 20x10 on 275/65/20. that there was a lot of trimming from what i remember to get to work, and there was still rubbing on hard bumps.