Supreme Suspension Lift

Has anyone installed the Supreme Suspension 3 in front 1 in back Lift? Picture please!

 

The spacer/block lift?

 

Don't do it. Get a bilstienift instead please.

 

Here's my order of preference/opinion for the front.

Block/spacer is very budget and improves nothing (under $60, dime more you overpaid)

Old Man Emu/5100 huge step up, but your looking at $425 from headstrong

Coilovers, best of the best. King, Icon, Fox, ect. But it's also over $1000

Rear options are blocks ($60) Add A Leaf ($80), complete leaf pack replacement ($400+).

Pretty much if a sponsor/vendor doesn't carry it, I would steer clear of it unless your Tacoma is a pavement princess.


That being said, I'm a HUGE OME fan. But on my Tacoma I run a 1" spacer (2inch of lift) and a wheelers 1.5" AAl. With half tank of fuel, my body is sitting level or pretty close.

Choose your budget. But anything 2.5" or more you need upper arms to correct the alignment. Thus why I stayed at 2".

 

1 inch block in the rear is fine for most people, ok for overlanding.

 

3" Supreme front spacer 60k miles later no issues at all now on 35's too with stock UCA. I did go with Toytec AAL in rear though as I have had blocks crack in the past.

 

This is before when I had Supreme 3" Front / 2" Rear.



Now I have OME shocks & 886 Springs because the front was sagging with the heavy ass bumper on spacers.

 

I had a space lift on for like a month took it out so fast rode terrible. Now I have ome bp51s in the front ome heavy leafs in the rear and fox 2.0 rr shocks rides so much better.