ARB 1250 Awning Install and Review!

Just followed this guide! I wasn’t able to find anything but nylon spacers to use...seem to be holding fine for the time being until I can find some metal ones.

 

The 2500 is perfect! Winter camping and beach shade capable.

 

6ft or 8ft?

 

The 2500mmx2000mm converts to
8.2 feet out from the vehicle x 6.6 feet in length (front to back).

 

That pic is Matanzas Beach, St. AUGUSTINE, FL

 

@mpatrick thanks for the write up! This worked great and for less than $10 in hardware.

 

Can somebody provide links for the hardware? Just want to make sure I'm buying the correct parts. I haven't purchased the awning yet to test fit hardware. Thanks! Searching the parts on lowes and home depot websites bring in a lot of different results and they all seem to be different sizes.

 

You’re welcome!

 

Let me see if I can find it.

 

Here are the steel spacers I used. Once you get these, it’s pretty easy to figure out what size bolts you need and then just get the right sized nuts and some washers and you’re good to go. https://www.homedepot.com/p/Everbil...acers-in-Chrome-2-Piece-Pack-800274/204604742

 

Thanks! How many of these did you use? I'm thinking 4 should be enough.