Bumper end Caps -$40

OEM Black bumper end caps with sensor holes, although the drivers side tabs are drilled out for some reason. Not sure what the previous owner meant to do here but its still the same size as original. Took them off when I installed super white end caps to match the truck.

Located in NorCal Sacramento CA area.
Asking $40 + shipping



Passenger side


Drivers side

 

PMed

 

How hard are these to get off? I hear that the one metal clip is a real pain in the butt?

 

If you have a pick or a good flat head screw driver it’s doable without taking the bumper off. I managed to take them off that way.

 

yeah the YouTube videos don’t really show detail on how to get it off. They show and say Pull real hard. thanks for the info

 

The clips are similar to these so all you do is pop the center up and then pull the whole thing out.

I think it took me 15 min per side but I was being very careful not to break any clips because I wanted to reuse them.

Honestly not a hard DIY.

 

Since you mean the metal clip I’ll let you know that you have to pull hard for sure. I wouldn’t use a screwdriver.

Before removing, feel for where the metal clip is. You can definitely feel it. When you go to put the bumper caps back on, if you put it on a piece of tape on the back of the clip and locate the same place it came from it is easy to reinstall. You just have to get your hand in the right position. Some people leave them off because they think it’s hard to do, but it’s very simple.

 

Bump

 

Bump

 

how much shipped to 81004?

 

Bump