Official 5-Lug Picture Thread

Just finished my 2006 Tacoma build today !

 

looking real good!

 

Did I make a mistake buying 32x11.5r15 with crager Steelies? Have a manual. Really don’t want to rub. Fire roads and flat ground are the majority of my travels. Ready lift kit and aal w/ bilstein 4600 and 5100 in the back. Heard you won’t rub but I need more feedback.

 

Do you still have your black box? You may need to roll over the pinch weld with a sledge. Also you may need to trim a little of the black front wheel liners. Im on 33s and barely rub only when Im really pushing it like full flex or going airborne

 

Black box mod complete. Hopefully won’t have to mess with the weld . Will it effect the camber significantly ? I will not be going airborne haha .. on purpose.

 

I never noticed anything with camber

 

Finally got around to cleaning up the wheels and getting some tires on them.

 

What wheels are those and did you have to modify them to fit??

 

The wheels came from a 2015 Jeep Patriot. They fit perfectly as if they were oem. The only thing that I needed to change was the center cap. The front grease cap for the hub prevents the use of the stock Jeep center cap since it protrudes past the edge of the center. I ordered some center caps that stuck out just enough and made some toyota stickers to make it look sort of oem, ha. The cap actually matches the lines of the wheel pretty well. Oh and I had to use extended lug nuts just to be on the safe side. With the extended ones I get just over eight turns.
Bolt pattern: 5x114.3mm
Center bore: 67.1mm
Offset: +40mm

 

The 32s are on with ready lift kit, 4600S in the front and 5100s in the rear. Just in time for the hurricane.

 

32x11.50s? Look good

 

Yes 32x11.5r15 . Barely rub and can fix easily but do have a wobble at 40mph -55mph. If anyone has a suggestion let me know please. Supposed to get a “dynamic” balance after my initial but idk what that will do.

 

Probs need a rebalance if its only at a certain mph range

 

can I use these leaf springs to give myself a 1 - 1.5" lift in the rear with the aal in them - or are the prerunner packs already bigger and it would be too big of a lift in the back? (im def not gonna pay that for them if I do try to get them)

 

I would just do an aal. The 6 lug leafs are different than 5 lugs. If you need more lift than just an aal you can do a long and a short aal as well as a shackle flip. Basically the rear lifting is the easier part it's the front that's the pain.

 

if tire balance isn’t the fix. it is wheel alignment. Might need some more caster to go with that lift.

 

Dude, that looks awesome! That was one of the first wheels I looked at when I started wheel shopping. I ended up with 16" Hyundai Sonata wheels instead.

 

Stang wheels +4hp!

 

pfft,+21 mpg with my Sonata wheels

Edit: dig the mustang wheels too!