What Have You Done To Your 3rd Gen Today?

They are here/ more coming

 

Are you running ov tune or are you running the stock ecu?

 

Does it interfere with your parking sensors or blind spot monitor (if equipped)? I’ve been on the fence about installing mine.

 

Yeah back up safety monitor doesn’t work since something is there, but blind spot monitors work just fine.

I need to do a back up camera relocation and it’ll be all good .

 

That’s about what I expected. Don’t mind loosing the parking sensors, but I’ve become fond of the bsm. I wonder if we can relocate the parking sensors though. Thoughts like that tell me it’s time to go to bed.

Night all!

 

Why not just buy a Tundra with the 5.7 that puts out more HP and torque with no supercharger? Seems like the cost would be comparable, you would have a bigger truck with better towing and hauling capability, and it would be more reliable in the long run because the motor doesn’t have the added stress of a supercharger.

 

The magnuson tune. That way magnuson covers your driveline warranty till 36k miles

 

Bc big trucks dont fit on tight trails.

 

I second this sentiment as well. Many people have said that I should have upgraded as well and just looking at the numbers it makes sense. It makes way more sense but many of the world’s roads aren’t built for the extra width of a full-size.

 

Actually Monday, not today... I installed this bad boy.

$1,100 Pioneer DMH-WC6600NEX 9" Capacitive Touchscreen, Modular Chassis – Wireless & Wired Apple CarPlay & Android Auto, Amazon Alexa, Bluetooth, HD Radio, FLAC, Backup Camera, Hi-Volt RCA

Pioneer DMH-WC6600NEX. I had the base bottom Entune head unit before. It worked to play music but wasn't very good at anything else. I had to get the Premium Entune bezel to work with this. I also forgot the put the antenna adapter in... LOL. I'll be cracking it open for that, and to add a USB cable. The screen is also tilted a little. I may see if I can do something about that. Overall, it's a great improvement over the base Entune crap.

 

Check out @SOS CONCEPTS Bestop bedrack. Fits softopper too. In fact I have it on the 3rd uncommon canvas shell and it fits that too.

Anyway check it out mine has been a game changer

 

Are you still able to adjust all the settings of your truck through that head unit?

 

Here's the color matched Seahawks marker light decals. Had to wait for darkness to get a good pic. Totally worth it! Thank you @rrentrop

 

wait, you can install ovtune on another vehicle? I thought the software is keyed to your laptop and your vehicle. I was looking at the site today and it looks like software/programmer is $379 and the profile another $350 or so!

 

Been meaning to post this for a while. Deleted my single rear seat and built a platform for a @Dometic CFX3 55IM and PLB40. Really stoked on this setup and have already used it on three trips. Quick rundown, the fridge runs off the PLB40, which is plugged in to the vehicle. So when the truck is off, it is purely running off the PLB40, when the truck is on, the PLB40 is charging. On to the pics:

Added some Stinger Roadkill Expert sound deadening to the rear wall and floor. I drove it before doing this, and it was very loud. This made a drastic improvement, however I ordered some more to add one more layer and complete the entire rear wall.


This is the rear wall I made. I added a lip to conform/ go over the top a bit to try and help mitigate sound escaping. The hole in the middle is for the latch the seat retains off of, as it would not allow the board to sit plumb.


Few shots of the platform itself before carpet. I wanted it as high as I could get it while still able to get the lid open. This enabled a decent amount of space below for storage (currently houses a CLS bag (trauma/first aid) as well as my air up/down gear and some Bino's. For mounting I bolted it to the stock seat brackets, which worked out really well. I was originally going to put some L brackets at the rear, connecting to the rear wall. That said it felt so solid I ended up not using them.




Some pics after install w/ carpet. Learned a lot with the carpeting, this was the biggest PITA imo. Wrapping presents is not my strong suit.





Finished product:



I realize I don't have the strapping photos in these, will upload those in a bit. For those wondering, material is 3/4" MDF and the links to everything are below.

Fridge:
https://www.dometic.com/en-us/us/pr...s/electric-coolers/dometic-cfx3-55im-_-220584

Battery:
https://www.dometic.com/en-us/us/pr...and-lighting/batteries/dometic-plb40-_-197468

Sound deadening:

$164 Stinger RKX36B Roadkill Expert Series Sound Damping Material Bulk Pack (Silver)

https://www.amazon.com/Stinger-RKX36B-Roadkill-Damping-Material/dp/B001HHP59G

Material:
https://www.homedepot.com/p/3-4-in-x-4-ft-x-8-ft-MDF-Panel-D11612490970000/304325742

 

Did MBRP change the font of their logo recently?

No shipping outside the lower 48,
but Worldwide is available...

 

$40? You got a heck of a deal! Try ham radio outlet for the power cord and antenna. I have the same radio in my tacoma, it’s fantastic.

 

Yeah i am new to all of this so anything i need to be looking for on an antenna

 

Look for a dual band, 2m/440, in case you get a dual band radio in the future. Do you have your ham license yet?