Manfred's #thicc boi aka 'White Rhino'

.....just towards the end.....

lol anytime.

 

New skid who dis?

 

Looks good

 

Just wait until your camera picks it up lol

 

that doesnt even work here!

 

Working on some insulation and electronic relocation for the cap. Full time habitat? who knows ¯\_(ツ)_/¯

Before:

It worked...until it didnt (changed it up) :

After:


In between:




solar extension hook up

 

Wish I wasn't rubbish at electrical. Looks awesome!

 

I'm really not that good.. at all

I ran short on heat shrink tubing and had it all hooked up initially. Didnt work with the 1/0 cable because was too rigid and wouldn't allow it to flex back cover up the cubby, so had to complelty change.

Also @tacoma16 taught me. I'm electrically retarded lol

 

Look at his first panel....you start, get better, do it three or four times till your good. Lol.

 

also dont you have to redo yours? perfect timing

 

Maybe....might wait to do it when I relocate the batteries.

 

remind me about that again...

 

taking the battery from the engine bay and relocating it to the bed....

 

With some new in cap construction taking place I had to run another (+) and (-) to the rear so i could use a rocker switch to control a fan for ventilating the back while sleeping. Condensation issues arise easily with the aluminum cap so I need to find a way to mitigate this. Ive come up with the following:

Night 1: 1x 80mm x 80mm cpu fan with air blowing out
Night 2: 1x 80mm x 80mm cpu fan with air blowing in
Night 3: 2 fans with one blowing in and one blowing out?

 

More updates from ventilation side of house.



Towards the head, vent for extraction

need to relocate the lights and get carpet put in.

also got me-self a

$379 Whynter FM-45G Portable Refrigerator and Deep, AC 110V/ DC 12V, Real Chest Freezer for Car, Home, Camping, and RV with-8°F to 50°F Temperature Range, 45 Quart Dual Zone, Gray

Whynter FM-45G 45-Quart Portable Refrigerator/Freezer. Will be running the wire to inside the cab to have either truck fed power, or solar fed power depending on the weath. More to follow.

 

Drop down table. Its finally alive!





Woop woop!

 

Been almost too busy to update.

Dropped in ECGS Bushing, and had the custom tool made by @tgelata







Further swapped out an O2 Sensor, Bank 2, sensor 2, to get rid of a P0420 code. Fingers crossed its the solution.

Filmed the driveline vibes ive been dealing with for sometime.

https://youtu.be/_QcyLpV4grA

Will be swapping out the carrier bearing.

 

Big day, finally broken in.